• มิซูมิแจ้งวันหยุดทำการในเดือนพฤศจิกายน 2562 คลิก
    MISUMI's Holiday in November 2019 click

MIL Standard Compliant Ribbon Cable Connector, HIF3B Series【1-100 Pieces Per Package】

MIL Standard Compliant Ribbon Cable Connector, HIF3B Series
  • Volume Discount

MIL standard compliant rectangular ribbon cable connector.
[Features]
· Also compatible with the H1F3 Series. The HIF3B Series has acquired UL compliance as a connector.
· With mechanism for preventing mis-insertion.
· Uses system in which the guide key on the pin header side creates a convex portion that is guided to and mates with the concave portion on the socket side (MIL standard.)
· With this system for guidance, the polarizing key inserts into the socket hole.
· This is also a guidance system in which the convex portion on the socket side (HIF3A type) combines with the slot located in the center of the pin header side.
· The recommended wire (UL2651) is an AWG#28 flat cable (7-core/0.127 mm, jacket diameter of 0.9 ±0.1 mm.)
[Applications]
· A large number of variations are available, enabling use with a wide range of equipment.

PDF

Japanese Only

MIL Standard-Compliant Product

HIF3B Series list

HIF3B Series list

Specifications of HIF3B Series MIL Standard Compliant Ribbon Cable Connector

Product Standards

RatingRated current - ID: 1 A, Crimping: 1 A (AWG32/36), Other: 3 ARated voltage: 200 V AC
Operating temperature range: -55°C to 85°C (Note 1)Operating humidity range: 40% to 80%
Storage temperature range: -10°C to 60°C (Note 2)Storage humidity range: 40% to 70% (Note 2)
ItemStandardConditions
1. Insulation resistance1,000 MΩ or moreMeasure at 500 V DC
2. Withstand voltageThere shall be no flashover or dielectric breakdownEnergize at 650 V AC rms for 1 min.
3. Contact resistance15 mΩ or lessMeasure at 0.1 A
4. Vibration resistanceThere shall be no electrical discontinuity for 1 μs or greaterFrequency: 10 to 55 Hz, Single amplitude: 0.75 mm, Three axial directions, 2 hours each
5. Humidity resistanceInsulation resistance: 1,000 MΩ or moreTemperature: 40°C ±2°C, relative humidity: 90 to 95%, left for 96 hours
6. Temperature cycleThere shall be no cracking or abnormalities with any of the parts(-55°C: 30 mins. > 15 to 35°C: Max. 5 mins. >
125°C: 30 mins. > 15 to 35°C: Max. 5 mins.) 5 cycles
7. Durability (Mating / Un-mating)Contact resistance: 15 mΩ or less500 mating / un-mating cycles
8. Solder heat resistanceNo melting of resin parts affecting performanceSolder bath: 260°C for 10 seconds
Manual soldering: Soldering iron temperature of 360°C for 5 seconds

(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
(Note 3) Be aware that deformation may occur to the pin header type lock if an excessive load is placed on the inside of the lock.

Materials/Processing

Part NameMaterialsFinishNote
Insulator casePBTBlackUL94V-0
Lock
ContactsBrassContact area: 0.2 μm min. gold plating-
DIP area: 2 μm min. pure tin plating-

Four wall right-angle through hole (HIF3B*-**PA-2.54DS), Four wall straight type (HIF3B*-**PA-2.54DSA), Four wall straight through hole, flux-blister prevention type (HIF3C*-**PA-2.54DSA), Three wall right-angle through hole (HIF3B-**PA-2.54DS), Three wall straight through hole (HIF3B-**PA-2.54DSA)
*Models with plating are a (71) specification.

Part NameMaterialsFinishNote
Insulator casePBTBlackUL94V-0
Lock
ContactsBrassSurface: 0.2 μm min. gold plating-

Wrapping type (HIF3B*-**P-2.54W), Double-layer right-angle through hole (HIF3B*-**PA-2.54WB)
*Models with plating are a (71) specification.

Part NameMaterialsFinishNote
InsulatorPBTBlackUL94V-0
ID contactBeryllium copperContact area: 0.2 μm min. gold plating-
ID area: 0.03 μm min. gold plating-

Socket type (for ID type, with mis-insertion prevention guide / HIF3B*-**D-2.54R), Socket type (for ID / HIF3B-**D-2.54R)

Part NameMaterialsFinishNote
InsulatorPBTBlackUL94V-0

Socket type (for crimping / HIF3B*-**D-2.54C)

HIF3 Series Mating Combination Diagram

Board-to-cable type

Board-to-cable type

Board-to-board type

Board-to-board type

Product Usage

Socket Side (Crimping) Assembly Method

Crimping method
Dedicated tools compatible with each terminal are necessary for connecting crimped contacts.


Contact insertion method
After confirming the crimping contact orientation, insert all the way to the back of the insulation case.
After inserting, lightly pull on the cable to confirm whether the contact lance is firmly fixed into the insulation case.

Contact insertion method

Contact insertion method

Contact replacement method

Contact replacement method

Contact replacement method
Use a contact extraction tool to remove any incorrectly inserted contacts.

Part Number
HIF3-6PA-2.54DSA(71)
HIF3-2022SC
HIF3-2022SCF
HIF3-2226SC
HIF3-2226SCA
HIF3-2226SCC
HIF3-2226SCF
HIF3-2226SCFA
HIF3-2226SCFC
HIF3-2428SC
HIF3-2428SCA
HIF3-2428SCF
HIF3-2428SCFA
HIF3-2630SCC
HIF3B-6D-2.54R
HIF3B-10D-2.54R
HIF3B-10PA-2.54DS(71)
HIF3B-14D-2.54R
HIF3B-16D-2.54R
HIF3B-20D-2.54R
HIF3B-26D-2.54R
HIF3B-26PA-2.54DS(71)
HIF3B-30D-2.54R
HIF3B-30PA-2.54DS(71)
HIF3B-34D-2.54R
HIF3B-34PA-2.54DS(71)
HIF3B-40D-2.54R
HIF3B-40PA-2.54DS(71)
HIF3B-50D-2.54R
HIF3B-50PA-2.54DS(71)
HIF3B-60D-2.54R
HIF3B-64D-2.54R
HIF3BA-6D-2.54R
HIF3BA-10D-2.54C
HIF3BA-10D-2.54R
HIF3BA-10PA-2.54DS(71)
HIF3BA-10PA-2.54DSA(71)
HIF3BA-10PA-2.54WB(71)
HIF3BA-14D-2.54C
HIF3BA-14D-2.54R
HIF3BA-14P-2.54W
HIF3BA-14PA-2.54DS(71)
HIF3BA-14PA-2.54DSA(71)
HIF3BA-16D-2.54C
HIF3BA-16D-2.54R
HIF3BA-16P-2.54W
HIF3BA-16PA-2.54DS(71)
HIF3BA-16PA-2.54DSA(71)
HIF3BA-16PA-2.54WB(71)
HIF3BA-20D-2.54C
HIF3BA-20D-2.54R
HIF3BA-20P-2.54W
HIF3BA-20PA-2.54DS(71)
HIF3BA-20PA-2.54DSA(71)
HIF3BA-20PA-2.54WB(71)
HIF3BA-26D-2.54C
HIF3BA-26D-2.54R
HIF3BA-26P-2.54W
HIF3BA-26PA-2.54DS(71)
HIF3BA-26PA-2.54DSA(71)
Part NumberNumber of pc(s). included in pkg.ชิ้น รวมVolume DiscountDays to Shipวันจัดส่งRoHSConnector series initials Applicable pin/contact Number Of Cores Connector Type Rated Current
(A)
Wiring Method Connection direction Representative Standard Plating of part touching terminal Product Category Specifications Features Conforming wire size
(AWG)
Contact Pitch
(mm)
Operating Temperature Range
(°C)
Same day 10G·H·IMale6For PCB1SolderStraightULGold (partial)Pin Header4 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85

100 Pieces Per Package

Same day 10G·H·IFemale--3Crimp--GoldSocket contactLoose terminalNA20–22NA-55 to +85
Available 2 Day(s) or more -G·H·IFemale--3Crimp--GoldSocket contactSeries terminalNA22 to 20--55 to +85

100 Pieces Per Package

Same day -G·H·IFemale--3Crimp--GoldSocket contactLoose terminalNA22–26NA-55 to +85

100 Pieces Per Package

Same day 10G·H·IFemale--3Crimp--Gold (partial)Socket contactLoose terminalNA22–26NA-55 to +85

100 Pieces Per Package

Same day -G·H·IFemale--3Crimp--Gold (partial)Socket contactLoose terminalVA type22–26NA-55 to +85
Available 2 Day(s) or more -G·H·IFemale--3Crimp--GoldSocket contactSeries terminalNA26 to 22--55 to +85
Available 2 Day(s) or more -G·H·IFemale--3Crimp--Gold (partial)Socket contactSeries terminalNA26 to 22--55 to +85
Available 2 Day(s) or more -G·H·IFemale--3Crimp--Gold (partial)Socket contactSeries terminalVA type26 to 22--55 to +85

100 Pieces Per Package

Available Same day -G·H·IFemale--3Crimp--GoldSocket contactLoose terminalNA24–28NA-55 to +85

100 Pieces Per Package

Same day 10G·H·IFemale--3Crimp--Gold (partial)Socket contactLoose terminalNA24–28NA-55 to +85
Available 2 Day(s) or more -G·H·IFemale--3Crimp--GoldSocket contactSeries terminalNA28 to 24--55 to +85
Available 2 Day(s) or more -G·H·IFemale--3Crimp--Gold (partial)Socket contactSeries terminalNA28 to 24--55 to +85

100 Pieces Per Package

Same day -G·H·IFemale--3Crimp--Gold (partial)Socket contactLoose terminalVA type26–30NA-55 to +85
Same day -G·H·IFemale6[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
Same day -G·H·IFemale10[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
Same day 10G·H·IMale10For PCB1SolderAngleULGold (partial)Pin Header3 walls/Dip typeNo Polarity SlotNA2.54-55 to +85
Same day -G·H·IFemale14[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
Same day 10G·H·IFemale16[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
Same day -G·H·IFemale20[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
Same day -G·H·IFemale26[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
Same day 10G·H·IMale26For PCB1SolderAngleULGold (partial)Pin Header3 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Same day -G·H·IFemale30[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
3 Day(s) or more -G·H·IMale30For PCB1SolderAngleULGold (partial)Pin Header3 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Same day -G·H·IFemale34[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
2 Day(s) or more 10G·H·IMale34For PCB1SolderAngleULGold (partial)Pin Header3 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Same day -G·H·IFemale40[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
Same day 10G·H·IMale40For PCB1SolderAngleULGold (partial)Pin Header3 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Same day -G·H·IFemale50[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
Same day 10G·H·IMale50For PCB1SolderAngleULGold (partial)Pin Header3 walls/Dip typePolarity Slot Left/Right x 1 EachNA2.54-55 to +85
Same day 10G·H·IFemale60[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
3 Day(s) or more -G·H·IFemale64[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketNANo Polarity Guide28 Flat cable2.54-55 to +85
Same day 10G·H·IFemale6[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketWith Guide for Preventing Incorrect InsertionPolarity Guide Center x128 Flat cable2.54-55 to +85
Same day 10G·H·IFemale10[Cable Connection] Cable Connection1CrimpStraightULNo terminalSocketGuidePolarity Guide Center x1NA2.54-55 to +85
Same day 10G·H·IFemale10[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketWith Guide for Preventing Incorrect InsertionPolarity Guide Center x128 Flat cable2.54-55 to +85
Same day -G·H·IMale10For PCB1SolderAngleULGold (partial)Pin Header4 walls/Dip typeNo Polarity SlotNA2.54-55 to +85
Same day -G·H·IMale10For PCB1SolderStraightULGold (partial)Pin Header4 walls/Dip typeNo Polarity SlotNA2.54-55 to +85
3 Day(s) or more -G·H·IMale10For PCB1SolderAngleULGold (partial)Pin HeaderFor 2 layers/DIP typeNo Polarity SlotNA2.54-55 to +85
Same day 10G·H·IFemale14[Cable Connection] Cable Connection1CrimpStraightULNo terminalSocketGuidePolarity Guide Center x1NA2.54-55 to +85
Same day 10G·H·IFemale14[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketWith Guide for Preventing Incorrect InsertionPolarity Guide Center x128 Flat cable2.54-55 to +85
Same day -G·H·IMale14For PCB1[Other] WrappingStraightULGoldPin Header4 wall/wrapping typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IMale14For PCB1SolderAngleULGold (partial)Pin Header4 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IMale14For PCB1SolderStraightULGold (partial)Pin Header4 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Available Same day 10G·H·IFemale16[Cable Connection] Cable Connection1CrimpStraightULNo terminalSocketGuidePolarity Guide Center x1NA2.54-55 to +85
Same day 10G·H·IFemale16[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketWith Guide for Preventing Incorrect InsertionPolarity Guide Center x128 Flat cable2.54-55 to +85
Same day -G·H·IMale16For PCB1[Other] WrappingStraightULGoldPin Header4 wall/wrapping typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IMale16For PCB1SolderAngleULGold (partial)Pin Header4 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IMale16For PCB1SolderStraightULGold (partial)Pin Header4 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IMale16For PCB1SolderAngleULGold (partial)Pin HeaderFor 2 layers/DIP typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IFemale20[Cable Connection] Cable Connection1CrimpStraightULNo terminalSocketGuidePolarity Guide Center x1NA2.54-55 to +85
Same day 10G·H·IFemale20[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketWith Guide for Preventing Incorrect InsertionPolarity Guide Center x128 Flat cable2.54-55 to +85
Same day -G·H·IMale20For PCB1[Other] WrappingStraightULGoldPin Header4 wall/wrapping typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IMale20For PCB1SolderAngleULGold (partial)Pin Header4 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IMale20For PCB1SolderStraightULGold (partial)Pin Header4 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Same day -G·H·IMale20For PCB1SolderAngleULGold (partial)Pin HeaderFor 2 layers/DIP typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IFemale26[Cable Connection] Cable Connection1CrimpStraightULNo terminalSocketGuidePolarity Guide Center x1NA2.54-55 to +85
Same day 10G·H·IFemale26[Cable Connection] Cable Connection1Pressure WeldingStraightULGoldSocketWith Guide for Preventing Incorrect InsertionPolarity Guide Center x128 Flat cable2.54-55 to +85
Same day -G·H·IMale26For PCB1[Other] WrappingStraightULGoldPin Header4 wall/wrapping typePolarity Slot Center x1NA2.54-55 to +85
Same day 10G·H·IMale26For PCB1SolderAngleULGold (partial)Pin Header4 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85
Available Same day 10G·H·IMale26For PCB1SolderStraightULGold (partial)Pin Header4 walls/Dip typePolarity Slot Center x1NA2.54-55 to +85

Loading...กำลังโหลด …

Basic Informationข้อมูลพื้นฐาน

Connector Shape Rectangular G·H·I HIF M·N·O MIL
Allowable Voltage(V) AC200

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Third-party Brand
Tel:038-959200 Press 7 / FAX:038-959288
9:00 - 18:00 (Monday - Friday)