Self-locking Transparent Cap Grip (TG)

Self-locking Transparent Cap Grip (TG)

Can be used with a custom symbol inserted in the center cap. Can be installed by firmly inserting, enabling standard cold drawn bars (of tolerance h9) to be used as is.

· The self-locking press fit grip uses a nylon bushing as an insert, features easy installation, and will not loosen, even under continuous intense vibration.
· Can be used with comfort anytime anywhere.
· No shaft threading required.
· Can be mounted to standard cold drawn bars (of tolerance h9).
· The nylon bushing is highly elastic and firmly adheres to the shaft surface.
· Moreover, the bushing serves to dampen vibration transmitted from the shaft, so that the mounted parts will not come loose as is often seen in screw-based types.
· Will not disengage from the shaft as long as a strong pulling force is not applied.
· Can be detached and reattached several times.
· Can be used with a symbol inserted in the center cap.
· Custom designs are supported.


Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipRoHSShaft Insertion Hole Diameter d
Grip thickness D
Grip length
4 Day(s) or more 6103533
4 Day(s) or more 6124038
4 Day(s) or more 6124543


  1. 1

Basic Information

Types Fixed Shape Shape The shape of a ball Grip Material Phenol
Grip surface No Mounting Section Material Polyamide Mounting Section Surface Treatment No
Mounting Method Press Fitting

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Third-party Brand
Tel:038-959200 Press 7 / FAX:038-959288
9:00 - 18:00 (Monday - Friday)