HR10 Panel Mount Receptacle (One-touch Lock)

HR10 Panel Mount Receptacle (One-touch Lock)
  • Volume Discount

Adoption of A 5-key Method Guide Allows for Smooth Connection

  • For Signal
  • Sensor
  • Solder
  • Nickel-Plated
  • One-Touch Lock

● It connects to straight plugs.
● The main unit is secured with nuts.


· Panel mount receptacles cannot be fitted with one another.

PDF

Specifications

HR10 Panel Mount Receptacle (One-touch Lock):Related Image

ModelNumber of CoresTypeWeight
g
HR10G-7R-4P734Male
(Pin)
1.8
HR10G-7R-6P7361.8
HR10G-10R-10P73102.8
HR10G-10R-12P73122.8
HR10G-7R-4S734Female
(Socket)
1.8
HR10G-7R-6S7361.8
HR10G-10R-10S71102.8
HR10G-10R-12S71122.8

More Information

HR10 Panel Mount Receptacle (One-touch Lock):Related Image
HR10 Panel Mount Receptacle (One-touch Lock):Related Image
Part Number
HR10G-7R-4P73
HR10G-7R-4S73
HR10G-7R-6P73
HR10G-7R-6S73
HR10G-10R-10P73
HR10G-10R-10S71
HR10G-10R-12P73
HR10G-10R-12S71
Part NumberVolume DiscountDays to Shipวันจัดส่งRoHSConnector series initials Applicable pin/contact Number Of Cores Notice Notice
Available 2 Day(s) or more 10G·H·IMale (plug)4140V100V
Available Same day 10G·H·IFemale (socket)4140V100V
Available 2 Day(s) or more 10G·H·IMale (plug)6140V100V
Available Same day 10G·H·IFemale (socket)6140V100V
Available 2 Day(s) or more 10G·H·IMale (plug)10140V100V
Available 2 Day(s) or more 10G·H·IFemale (socket)10140V100V
Available 2 Day(s) or more 10G·H·IMale (plug)12140V100V
Available 2 Day(s) or more 10G·H·IFemale (socket)12140V100V

Loading...กำลังโหลด …

  1. 1

Characteristics

Item Contents
Rated Current 2 A or lower
Rated Voltage 14-core: 150 VAC / 200 VDC, Other: 100 VAC / 140 VDC
Withstand Voltage 300 VAC or less (500 VAC or less for 4-core) / 1 minute
Insulation Resistance 1,000 MΩ or more / 100 VDC
Contact Resistance 10 mΩ or less / 1 ADC
Compatible Wire Size AWG26 or below Loose Wires or 0.15 mm2 or less Loose Wires

* For applicable wire size, cable finished outer diameter should be within cable clamp inner diameter.

Material / Finish

Item Materials Finish
Body Shell Zinc Alloy Satin Nickel Plated
Pin Contact Brass Silver Plating
Socket Contact Phosphor Bronze Silver Plating
Insulator Polyamide Resin Black

Contact Arrangement Diagram


Connection Work Method (Relay type can be done by the same method.)

Number of Cores Wrench Spacing (mm) D Dimension (mm) Wrench Tightening Force
4.6 7.5 10 1.5 N・m (15 kgf・cm)
10.12 9.5 16 1.5 N・m (15 kgf・cm)

Connector assembly is performed in the following order.
(1) Pass the cable through the cord bushing and connector body, and then solder to the insulator unit contact.
(2) After soldering the wire to the connector, crimp the clamp brackets attached to the connector with the crimp tool (HR10A-TC-02) or pliers.
(3) Fit the insulator unit screw part into the connector body. (Use a wrench and tighten to the values shown in the table.) When tightening the connector body, loosen the D part first so that the solder connection part is not placed under stress.
(4) Tighten the fastening screw so that its tip touches one of the two bosses on the clamp bracket. Note that the fastening screw is fixed with tightening torque of 0.3 N⋅m (3 kgf⋅cm).
(5) Finally, cover the the cord bushing with the connector body.

Connector Insertion and Removal Method

Basic Informationข้อมูลพื้นฐาน

Connector Shape Circular Type G·H·I HR10 Application Cable-to-panel mount
Allowable Current(A) 2 Allowable Voltage(V) 100 / 140 Wire connection method Solder
Connection direction Straight Protection function (environmentally resistant) None Removal method One-touch

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Wiring parts/Control and PC Parts
Tel:038-959200 Press 7 / FAX:038-959288
9:00 - 18:00 (Monday - Friday)