Aluminum Frame 6 Series/slot width 8/30x30mm

Note that, for some of the types shown here, order might be unable to be received by the MISUMI Thailand, Malaysia, Indonesia, and/or India offices.

Aluminum Extrusion 6 Series/slot width 8/30x30mm:Related Image
Aluminum Extrusion 6 Series/slot width 8/30x30mm:Related Image

Aluminum Extrusion 6 Series/slot width 8/30x30mm:Related Image

[ ! ]Cut surfaces and altered parts are not surface treated.

■6 Series
Aluminum Extrusions with 8mm Slot Width. Applicable to M6 Screws.

Specifications

Part Number - L
EFST6-3030
KHFST6-3030
-
-
800
4000


■Configurable Length Extrusion

Type [ M ]Material [ S ]Surface Treatment Part Number L 0.5mm Increment Mass
kg/m
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize HFST6-3030 50~4000 0.95 351 3.03x104 3.03x104
HFS A6N01SS-T5 Black Anodize HFSTB6-3030 50~4000 0.95 351 3.03x104 3.03x104
EFS A6N01SS-T5 Clear Anodize EFST6-3030 50~4000 0.91 337 3.08x104 3.08x104
EFS A6N01SS-T5 Black Anodize EFSTB6-3030 50~4000 0.91 337 3.08x104 3.08x104
NEFS A6063S-T5 Clear Anodize NEFST6-3030 50~4000 0.91 337 3.08x104 3.08x104

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.
■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.

Type [ M ]Material [ S ]Surface Treatment Part Number Lmm Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize KHFST6-3030 4000 351 3.03x104 3.03x104
HFS A6N01SS-T5 Black Anodize KHFSTB6-3030 4000 351 3.03x104 3.03x104
EFS A6N01SS-T5 Clear Anodize KEFST6-3030 4000 337 3.08x104 3.08x104
EFS A6N01SS-T5 Black Anodize KEFSTB6-3030 4000 337 3.08x104 3.08x104
NEFS A6063S-T5 Clear Anodize KNEFST6-3030 4000 337 3.08x104 3.08x104

[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.

Alterations

Aluminum Extrusion 6 Series/slot width 8/30x30mm:Related Image
By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.
CategoryAlteration NamesCodesExplanationsCatalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling ServiceP2-755&756
End TappingEnd Tapping on Center HoleLTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends.P2-757
End Tapping 4 Corner HolesLSP/RSP/SPWP2-768
Specify How to CutPrecision CutSCChange total length tolerance. (L±0.5→L±0.2)
[ ! ]Available only for L≦1500
P2-758
45 deg CutL_T45/R_T45Cut at 45 deg angle. 
Wrench Access HolesWrench Access Hole at Fixed PositionLWP/RWPAdd wrench access holes at fixed position for blind joints. P2-759&760
Wrench Access Hole at Specified PositionAH/BH/AV/BVAdd wrench access holes at specified position for blind joints.P2-761&762
CounterboresCounterbores at Specified PositionZ6/XA100Add counterbores at specified position. Use the holes for connecting the frames and a table top.P2-763
Holes for Specific Blind Joint TypeD HoleLDH/RDHAdd holes needed for Single Joint connection.P2-764
S HoleLSH/RSHAdd holes needed for pre-assembly double joint connection.P2-765
M HoleLMH/RMHAdd holes needed for post-assembly double joint connection.P2-766
L HoleJLP/KLPAdd holes needed for parallel joint connection. P2-767
Other AlterationsGNFS/GFS Series End TappingLTS/RTS/TSWAdd end tappings on high rigidity frames.P2-768
HFSR Series End TappingLTS/RTS/TSWAdd end tappings needed for adding a protection cover on the end fo HFSR series frame.

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...กำลังโหลด …
Part Number
EFST6-3030-[50-1800/0.5]
EFST6-3030-[1801-4000/0.5]
EFSTB6-3030-[50-1800/0.5]
EFSTB6-3030-[1801-4000/0.5]
HFST6-3030-[50-4000/0.5]
HFSTB6-3030-[50-1800/0.5]
HFSTB6-3030-[1801-4000/0.5]
KEFST6-3030-4000
KEFSTB6-3030-4000
KHFST6-3030-4000
KHFSTB6-3030-4000
KNEFST6-3030-4000
NEFST6-3030-[50-4000/0.5]
Part NumberVolume DiscountDays to Shipวันจัดส่งRoHSExtrusion Type_ Surface Treatment Material L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)
3 Day(s) or more 10EFS (Lightweight)Clear AnodizeA6N01SS-T5Configurable-50 ~ 1800
3 Day(s) or more 10EFS (Lightweight)Clear AnodizeA6N01SS-T5Configurable-1801 ~ 4000
3 Day(s) or more 10EFS (Lightweight)Black AnodizeA6N01SS-T5Configurable-50 ~ 1800
3 Day(s) or more 10EFS (Lightweight)Black AnodizeA6N01SS-T5Configurable-1801 ~ 4000
3 Day(s) -HFS (Standard)Clear AnodizeA6N01SS-T5Configurable-50 ~ 4000
3 Day(s) or more 10HFS (Standard)Black AnodizeA6N01SS-T5Configurable-50 ~ 1800
3 Day(s) or more 10HFS (Standard)Black AnodizeA6N01SS-T5Configurable-1801 ~ 4000
Available 5 Day(s) 10EFS (Lightweight)Clear AnodizeA6N01SS-T5Stationary4000-
Available 5 Day(s) 10EFS (Lightweight)Black AnodizeA6N01SS-T5Stationary4000-
Available 3 Day(s) -HFS (Standard)Clear AnodizeA6N01SS-T5Stationary4000-
Available 3 Day(s) 10HFS (Standard)Black AnodizeA6N01SS-T5Stationary4000-
Available 3 Day(s) -NEFS (Economy)Clear AnodizeA6063S-T5Stationary4000-
3 Day(s) -NEFS (Economy)Clear AnodizeA6063S-T5Configurable-50 ~ 4000

Loading...กำลังโหลด …

  1. 1
 

Basic Informationข้อมูลพื้นฐาน

Standard Extrusion Size(mm) 30 Extrusion Size 30x30 Extrusion Series 6 Series
Extrusion Type Square Shape Number of Extrusion Slots 1 Slot x 1 Slot Number of Slotted Surfaces Two-Side Slots
Surface Milled Not Provided Extrusion Size: Width (A)(mm) 30 Extrusion Size: Thickness (T)(mm) 30

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation
Tel:038-959200 Press 7 / FAX:038-959288
9:00 - 18:00 (Monday - Friday)