Aluminum Frame 5 Series/slot width 6/40x40x20mm

Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.

Aluminum Extrusion 5 Series/slot width 6/40x40x20mm:Related Image

Aluminum Extrusion 5 Series/slot width 6/40x40x20mm:Related Image

Aluminum Extrusion 5 Series/slot width 6/40x40x20mm:Related Image

[ ! ]Cut surfaces and altered parts are not surface treated.

■5 Series
Aluminum Extrusions with 6mm Slot Width. Applicable to M5 Screws.


Part Number - L
HFSR5-404020 - 800

■Configurable Length Extrusion

Type [ M ]Material [ S ]Surface Treatment Part Number L 0.5mm Increment Mass
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize HFSR5-404020 50~4000 1.13 419 5.95x104 5.95x104

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard
Product Services" (P.103) and contact the relevant person in charge at MISUMI.


Aluminum Extrusion 5 Series/slot width 6/40x40x20mm:Related Image
By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.
CategoryAlteration NamesCodesExplanationsCatalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling ServiceP2-755&756
End TappingEnd Tapping on Center HoleLTP/RTP/TPW
Add tappings on frame ends.P2-757
End Tapping 4 Corner HolesLSP/RSP/SPWP2-768
Specify How to CutPrecision CutSCChange total length tolerance. (L±0.5→L±0.2)
[ ! ]Available only for L≦1500
45 deg CutL_T45/R_T45Cut at 45 deg angle. 
Wrench Access HolesWrench Access Hole at Fixed PositionLWP/RWPAdd wrench access holes at fixed position for blind joints. P2-759&760
Wrench Access Hole at Specified PositionAH/BH/AV/BVAdd wrench access holes at specified position for blind joints.P2-761&762
CounterboresCounterbores at Specified PositionZ6/XA100Add counterbores at specified position. Use the holes for connecting the frames and a table top.P2-763
Holes for Specific Blind Joint TypeD HoleLDH/RDHAdd holes needed for Single Joint connection.P2-764
S HoleLSH/RSHAdd holes needed for pre-assembly double joint connection.P2-765
M HoleLMH/RMHAdd holes needed for post-assembly double joint connection.P2-766
L HoleJLP/KLPAdd holes needed for parallel joint connection. P2-767
Other AlterationsGNFS/GFS Series End TappingLTS/RTS/TSWAdd end tappings on high rigidity frames.P2-768
HFSR Series End TappingLTS/RTS/TSWAdd end tappings needed for adding a protection cover on the end fo HFSR series frame.

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Part Number
Part NumberVolume DiscountDays to ShipRoHSOverall Length L
3 Day(s) or more 650 ~ 1800
3 Day(s) or more 61801 ~ 4000


  1. 1

Basic Information

Standard Extrusion Size(mm) 20 Extrusion Series 5 Series Extrusion Type L/R Shape
Extrusion Type_ HFS (Standard) Surface Treatment Clear Anodize Surface Milled Not Provided
Material A6N01SS-T5 Extrusion Size: Width (A)(mm) 40 Extrusion Size: Thickness (T)(mm) 40
L Dimension Fixed, Specified Configurable Extrusion Size: L-Shaped Width(mm) 20 Alterations 20

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation
Tel:038-959200 Press 7 / FAX:038-959288
9:00 - 18:00 (Monday - Friday)