(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน เมษายน 2567 | Notice holiday in April 2024 > คลิก
MISUMI Screw Maintenance Components
Recommended Category
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
- 23 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Use]
・ Please use with gloves for molding spot.
[Features]
-Because it is made of Kevlar, it is a high-performance arm cover that has not only heat resistance at 260 degrees, but also cutting resistance function (US National Standard Association ANSI / ISEA 105-2016 CUT LEVEL A2 compliant).
-There is a hole through the thumb to prevent exposure of the wrist due to sleeve up.
-The measured length before wearing is about 54 cm and covers up to the upper arm.
・ The number is 1 double (both left and right).From: ฿ 901.00 Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Screw Head Disassembly Wrench【1-5 Pieces Per Package】
MISUMI
[Applications]
· Used to remove screw heads from screws.
[Features]
· S type can be used for screw heads for 3, 4 and 5-groove. L type is for 4 and 5-groove.
· Designed to fit to the screw head in balance just by pushing the claw into the holes with engraved numbers 3, 4 and 5 on one side and turning the slotted screw on the push-in side, which enables smooth removal work. The engraving of L type is the numbers 4 and 5.
· It comes with five claws, each of which can be independently tightened. The tip of the claw is brass, which prevents it from damaging screw heads.From: ฿ 3,731.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Applications]
Used to accommodate the removal of caked resin from the screw.
[Features]
· Copper Gauze can be wrapped around the screw in a large contact area, comparing to brush, resulting in more effectiveness. Furthermore, the Copper Gauze can be used during the polishing process, after applying Wax for Screw Maintenanc (M-HGMX) to ensure that the Wax is applied thoroughly.From: ฿ 546.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUNZE ECO COVER (STANDARD DETACHABLE INSULATION COVER)
MISUMI
【Features】
・Reduce energy costs by insulating the cylinder heater of the injection molding machine.
・By adopting a heat-resistant magic fastener, it can be easily attached and detached without special construction.
・By combining 24 types of standard products (modular), it is possible to support most molding machines.
・High heat insulation material is used, and the inside (high temperature side) heat resistance temperature is about 1000 ° C.
・By suppressing wasteful heat dissipation, it is also effective in saving energy for air conditioning.
・Since the inner side is electrically insulating, it is possible to cover the heater surface directly.
・No asbestos is used.From: ฿ 4,778.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Applications]
· Used to remove caked resin from screws.
[Features]
· Large equipment and device are not neccesary.
· One piece of M-HGMX can be used to clean φ20 screw approximately 20 times.From: ฿ 1,200.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MISUMI
From: ฿ 678.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Applications]
It is used for removing screws from a Injection machine.
[Features]
With a screw type adjustment structure, it supports various screw outer diameters.
The tip of the claw is brass, which prevents it from damaging screws.From: ฿ 9,555.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Applications]
Used to accommodate the removal of caked resin from the screw.
[Features]
· Copper Gauze can be wrapped around the screw in a large contact area, comparing to brush, resulting in more effectiveness. Furthermore, the Copper Gauze can be used during the polishing process, after applying Wax for Screw Maintenanc(M-HGMX), (M-HGMX) to ensure that the Wax is applied thoroughly.From: ฿ 4,004.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MISUMI
[Applications]
M-HML: Use for maintenance of screws, nozzles, band heaters, etc.
M-HMM: In addition to the M-HML, these gloves are Kevlar blended, resulting in high function gloves with the same resistant properties as cut-resistant gloves.（ American National Standards InstituteANSI/ISEA105-2016 CUT LEVEL A3 Conformance）
M-HMH: High-temperature gloves for diecasting. Use according to the temperature.From: ฿ 1,183.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
■ Application : Use to remove the injection screw of Injection Molding Machine manufactured by Sodick.From: ฿ 23,660.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
From: ฿ 1,251.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Wheel Brush Mandrel for Molding Machine
MISUMI
【Use】
・We can use for cleaning of injection molding machine cylinder.
【Features】
・This is a dedicated mandrel for wheel brush M-CWB-B for molding machine.
・With 1/4 NPT screw, it can be connected with the extension shaft M-WES and pipe M-EXT-P.
・It is effective to use it together with the power tool joint M-EXT-J.
【Accessories】
・1 M10 nut, 2 washers for M10From: ฿ 683.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
【Use】
・We can use for cleaning of injection molding machine cylinder.
【Features】
・It is difficult to bend because it is a pipe-processed product, and it reliably transmits the force of the arm to the brush.
It is effective to use it together with the power tool joint M-EXT-J.
【Accessories】 1/4 NPT both ends female socket 2 piecesFrom: ฿ 1,570.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
【Use】
・We can use for cleaning of injection molding machine nozzle
【Features】
・Compared with the previous cleaning using wires, the efficiency can be increased.
・Since both ends of the brush are pulled alternately and cleaned, they can be used even if the brush is bent.From: ฿ 1,356.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
【Use】
・We can use for cleaning of the injection molding machine nozzle inside.
【Features】
・Since it has a tip angle, it is easy to scrape the stuck resin.
・The hardness is HRC40 ~ 45.From: ฿ 855.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
【Use】
・We can use for clamping torque management of injection molding machine screw head (with two flats width).
【Features】
・With a brass protective plate, it prevents damage to the screw head.
By managing torque, it is possible to prevent damage due to over tightening and to reduce problems.From: ฿ 8,418.00 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
■ Application : Use to remove the plasticizing cylinder of Injection Molding Machine manufactured by Sodick.From: ฿ 15,470.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Applications]
The installation width of the roller can be adjusted in three steps according to the screw diameter. (Supports screw diameters of Φ25 to 200)
[Features]
Enables cleaning work while placing and turning screws. The same process applies when checking the external appearance of the screw.From: ฿ 9,191.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Applications]
Used to fix screws with a vise.
It has a horizontal V-groove on one side and a 45° V-groove in the vertical direction on the other side, allowing objects with uneven shapes to be fixed in close contact.
[Features]
As it has a magnet, it can be easily installed to a vise.
As it is fixed, screw maintenance can be performed by one person.From: ฿ 1,547.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
WHEEL BRUSH FOR MOLDING MACHINE
MISUMI
【Use】
・We can use for cleaning of injection molding machine cylinder.
【Features】
・With a high density brass wheel brush, resin can be aimed at pinpoint.
・ A wide range of sizes is available according to the cylinder diameter
・ It is effective to use it together with the dedicated mandrel M-CWB-M, extension pipe M-EXT-P, and power tool joint M-EXT-J.From: ฿ 592.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Extension Joint(Shaft Diameter φ8, Joint 1/4 NPT)
MISUMI
【Use】
・We can use for cleaning of injection molding machine cylinder.
【Features】
・It can be gripped by a power tool (power drill) and work efficiency is improved.
・Can be connected to the extension shaft M-WES and the extension pipe M-EXT-P.From: ฿ 1,183.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
LEATHER GLOVES FOR MOLDING SITES
MISUMI
■ Features
・Gloves designed for use in molding sites.
・The high-grade type is made from two layers of leather to enhance the strength.From: ฿ 282.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
■ Application :
・Use to remove the plasticizing cylinders and etc. of Injection Molding Machine manufactured by Sodick.
・If the nut cannot be loosened using the extend socket, insert the pipe type jig into the handle and turn the jig.From: ฿ 3,640.00 Days to Ship:
3 Day(s)
3 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.          | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | |||||||||||||||||||||||
| CAD |
| ||||||||||||||||||||||
| From | ฿ 901.00 | ฿ 3,731.00 | ฿ 546.00 | ฿ 4,778.00 | ฿ 1,200.00 | ฿ 678.00 Special Price On Sale Until 31/03/2025 | ฿ 9,555.00 | ฿ 4,004.00 | ฿ 1,183.00 Special Price On Sale Until 31/03/2025 | ฿ 23,660.00 | ฿ 1,251.00 | ฿ 683.00 | ฿ 1,570.00 | ฿ 1,356.00 | ฿ 855.00 | ฿ 8,418.00 | ฿ 15,470.00 | ฿ 9,191.00 | ฿ 1,547.00 | ฿ 592.00 | ฿ 1,183.00 | ฿ 282.00 | ฿ 3,640.00 |
| Days to Ship | Same day | 5 Day(s) | 3 Day(s) | 3 Day(s) | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | Same day | 3 Day(s) | 5 Day(s) | Same day | 5 Day(s) | Same day | 3 Day(s) | 7 Day(s) | 3 Day(s) | Same day | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 3 Day(s) |
Loading...
Related Categories to Screw Maintenance Components
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?