(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
Holding Tools for O.D. Tuning（Applicable Tip Shape：V (35° Diamond-Shaped)）
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
- Negative
- Pozidriv
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 79 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
S...SVUB (C) Type (Outer Diameter and Undercutting Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 5° (B); clamp method: screw-on (S)From: ฿ 9,280.00 Days to Ship: 
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).From: ฿ 3,056.63 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VC○○ Inserts , SP Tool Bit for Outer Diameter, Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 3,844.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VN○○ Inserts, MP Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 5,251.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
VN○○ Insert Compatible Bit, for End Surface and Profile Machining, MP Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 5,251.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With VN Inserts, Double-Clamp Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
The double-clamp tool bite achieving outstanding machining with a simple clamping mechanism.
[Features]
· Single action double clamp mechanism is adopted.
· New and optimized clamp piece.
· Improved vibration-resistance and chip discharge.
· Adopts special surface treatment.
· Clamp screw with Torx hole on both ends.
· New double clamp type.
· Insert is securely clamped.
· Excellent blade-tip position accuracy.
· Economic negative insert.
· A series of small inserts is also available.
[Application]
· Used for machining holder for turning.From: ฿ 5,251.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVPB Type (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)From: ฿ 2,500.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVJNR/L
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 6,777.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVJBR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 3,393.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVQNR/L
TUNGALOY
A multi-clamp tool.
[Features]
·Approach angle: 117.5°.
·Insert used: Negative 35° and 25°, rhombic.
[Applications]
·For copy cutting.From: ฿ 5,202.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVJCR/L
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 5,129.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVQCR/L
TUNGALOY
Screw-on outer diameter, profiling tools.
[Features]
·Approach angle: 117.5°.
·Uses a positive type insert.
[Applications]
·For copy cutting.From: ฿ 5,606.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Turning A, Double-Clamp Type AVQNR/L
TUNGALOY
Double clamp type tool.
[Features]
·Approach angle: 117.5°.
·Insert used: Negative 35° and 25°, rhombic.
[Applications]
·For copy cutting.From: ฿ 4,800.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 15° (D); clamp method: screw-on (S)From: ฿ 5,114.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With XC Inserts, Profile Tool Bit for Outer Diameter and Profile Processing
MITSUBISHI MATERIALS
Double clamp type profiling tool.
[Features]
· Tool consolidation is made possible and cycle time is shortened.
· Adopts highly reliable double clamp.
· Achieves good chip disposal performance with a breaker shape suitable for profiling.
· Screw-on type.
· Uses a 25° two-bolt insert.
· Pulling up of max. 60° is possible.
[Application]
· For profiling.
· 300° spherical surface processing is possible.From: ฿ 7,550.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Holder for Outer Diameter Machining (Screw Clamp) SVJCR/L, SVVCN, SVXCR/L
ISCAR
Various inserts can be mounted.From: ฿ 3,932.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
DVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)From: ฿ 3,025.27 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025DVVN Type (External Diameter/Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)From: ฿ 3,025.27 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
PVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,119.35 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVLP Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)From: ฿ 5,000.85 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVVB Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)From: ฿ 2,554.89 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Positive Inserts, TR-V13JBR/L
SANDVIK
[Features]
Extremely high clamp rigidity
The T-rail interface ensures minimal undercutting on the restraint surface, maintaining long-term machining precision
High-precision machining
For profile turning.From: ฿ 6,715.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVP2PR/L
TUNGALOY
Positive for Outer Diameter and End Face Cutting, No OffsetFrom: ฿ 3,393.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type M TAC Tool Bit for Outer Diameter, Screw On Type MVVNN
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 6,777.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVHCR/L
TUNGALOY
A screw-on tool.
[Features]
·Approach angle: 107.5°.
·Insert used: Positive 35°, rhombic.
[Applications]
·For copy cutting.From: ฿ 6,521.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVVCN
TUNGALOY
Positive for Outer Diameter and Profiling MillingFrom: ฿ 5,606.00 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,800.00 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,800.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
C Type with Dimples for Ceramic Insert, Double-Clamp Type CVVNN
TUNGALOY
Negative for Outer Diameter and Profiling MillingFrom: ฿ 7,292.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tool Bit Applicable With VC○○ Inserts, SP Tool Bit for End Surface and Profile Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)From: ฿ 5,595.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Applicable With VN Inserts, Double-Clamp Tool Bit for End Surface and Profile Processing
MITSUBISHI MATERIALS
VN○○ insert compatible Double-clamp tool bit for end surface and profile processing.
[Features]
· Achieves outstanding stable machining with a simple clamping mechanism.
· Single action double clamp mechanism is adopted.
· New and optimized clamp piece.
· Improved vibration-resistance and chip discharge.
· Adoption of special surface treatment.
· Clamp screw with Torx hole on both ends.
· New double clamp type.
· Insert is securely clamped.
· Excellent blade-tip position accuracy.
· Economic negative insert.
· A series of small inserts is also available.
[Application]
· Machining holder for cutting.From: ฿ 5,251.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
[Features]
· For external shape machining.
· Can be mounted on an automatic cam-driven lathe.
· 7 mm to 12 mm small shank.
· A single holder enables front turning, back turning, groove machining, thread machining and part-off machining.
· Ideal for machining parts with a small diameter of ø5 mm or less.From: ฿ 8,031.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI MATERIALS
This is a 2-corner type threading holder for compact automatic lathes. It is for outer diameter processing.From: ฿ 6,041.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
BTAH/BTVH/CTBH Outer Diameter Post-Grinding Processing
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter and post-pull; compatible insert shape: B (82° parallelogram), non-ISO standard; clamp method: screw-on (S)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI, External Front Turning, No Offset
MITSUBISHI MATERIALS
[Specifications]·Machining applications: outer diameter; compatible insert shape: V (35° two-bolt), D (55° two-bolt), C (80° two-bolt), V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 11° (P); clamp method: screw-on (S)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
PRDC/PRGC/SVVB for Combined Machining, for Outer Diameter / End Face / Profile Machining
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt), R (round); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S), pin lock (P)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
SVPB for Combined Machining, for End Face / Profile Machining
MITSUBISHI MATERIALS
[Specifications]·Machining applications: flange and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)From: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Holder for Outer Diameter Machining (Wedge Clamp) SVJNR/L-F, SVVNN (Screw Clamp)
ISCAR
Various inserts can be mounted.From: ฿ 4,360.00 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
DVPN Type (External Diameter, Profiling/Undercutting)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)From: ฿ 3,652.44 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
MVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (M)From: ฿ 4,593.19 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
MVVN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (M)From: ฿ 4,593.19 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
PVPN Type (External Diameter, Copying/Undercutting)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,521.92 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
PVVN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)From: ฿ 3,063.41 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVJB-FF Type (not offset) (outer diameter, profile machining)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).From: ฿ 2,200.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVJB Type (outer diameter, profile machining)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).From: ฿ 3,025.27 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVJP-FF Type (not offset) (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)From: ฿ 2,962.55 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVLP-FF Type (not offset) (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)From: ฿ 2,711.00 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)From: ฿ 2,805.76 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C3-MVJNR/L
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Shank Tool Bit For Turning, R/L170.35
SANDVIK
T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 7,895.93 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 29,945.81 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn 107 Cutting Unit For Turning, C-SVVBN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 17,204.72 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 24,225.32 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Unit, T-Max M Top Clamp, MVJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 41,698.81 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DVJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, DVVNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 9,560.07 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DVPNR/LFrom: ฿ 7,063.86 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVVNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 7,739.92 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cutting Head, Outer Diameter Turning Positive Inserts, CoroTurn, C3-SVHBR/L-22040-11
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 14,583.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR/L
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 14,583.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp, SVHBR/L
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 14,583.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp, SVVBN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 13,060.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Positive Inserts, Shank Tool Bit, TR-V13JBR/L-S
SANDVIK
Excellent chip control and process stability for best part qualityFrom: ฿ 5,650.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik Outer Diameter Holder Small Lathe Tool Shank Bit QS Holding System Short Bit QS- SVABR/LFrom: ฿ 7,251.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1
SANDVIK
Quick change system specially developed for small automatic lathes
A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setupFrom: ฿ 7,251.00 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJCR/L-E11HP
SANDVIK
Quick change system specially developed for small automatic lathes
A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setupFrom: ฿ 14,916.53 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVVBN1616E11
SANDVIK
Quick change system specially developed for small automatic lathes
A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setupFrom: ฿ 7,687.91 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Compact Lathes, CoroTurn, 107, SVABR/LKS
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 5,650.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13JBR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 14,583.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13MBL
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,213.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13VBN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 15,488.58 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-11
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 5,650.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 5,650.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Holder For Outer Diameter Machining, WVVNN/HVVNN
NGK SPARK PLUG
This is a holder for outer diameter processing made by NGK SPARK PLUG.
35° two-bolt shape, VN□A1604 (1607), VN□□1604/VNGX1607 inserts are compatible.
Clamping methods include the double clamping, etc.From: ฿ 9,528.97 Days to Ship:
14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
Holder For Back-Turning, CH-SVXCL
NGK SPARK PLUG
Flange back processing for front comb type tool rest that can process detailed partsFrom: ฿ 9,227.45 Days to Ship:
14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
Holder For Front-Turning, Y-SVXCL
NGK SPARK PLUG
It contributes to a wide range of fields, including automobiles, watches, cameras, home appliances, office equipment, etc.From: ฿ 12,061.78 Days to Ship:
14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
Holder For Front-Turning, SVAC-N
NGK SPARK PLUG
[Features]
·By adopting a unique center height adjustment mechanism, you can easily adjust the height of the cutting edge with a single wrench! Reduces the time spent for accuracy!From: ฿ 6,513.73 Days to Ship:
6 Day(s)
6 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | KYOCERA | KYOCERA | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | KYOCERA | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | ISCAR | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | ISCAR | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | NGK SPARK PLUG | NGK SPARK PLUG | NGK SPARK PLUG | NGK SPARK PLUG |
| Product Series | S...SVUB (C) Type (Outer Diameter and Undercutting Machining) | AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling) | Tool Bit Applicable With VC○○ Inserts , SP Tool Bit for Outer Diameter, Profile Processing | Tool Bit Applicable With VN○○ Inserts, MP Tool Bit for Outer Diameter and Profile Processing | VN○○ Insert Compatible Bit, for End Surface and Profile Machining, MP Bit | Applicable With VN Inserts, Double-Clamp Tool Bit for Outer Diameter and Profile Processing | SVPB Type (outer diameter, end surface, profile, relief machining) | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVJNR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVJBR/L | Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVQNR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVJCR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVQCR/L | VD○○ Insert Compatible Bit, for Outer Diameter and Profile Machining, Aluminum Alloy Bit | Applicable With XC Inserts, Profile Tool Bit for Outer Diameter and Profile Processing | Holder for Outer Diameter Machining (Screw Clamp) SVJCR/L, SVVCN, SVXCR/L | Outer-Diameter Turning - Shank Tool Bit For Positive Inserts, TR-V13JBR/L | J-Series, Type J / Outer Diameter Cutting, Screw-On Type JSVP2PR/L | S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SVHCR/L | C Type with Dimples for Ceramic Insert, Double-Clamp Type CVVNN | Tool Bit Applicable With VC○○ Inserts, SP Tool Bit for End Surface and Profile Processing | Applicable With VN Inserts, Double-Clamp Tool Bit for End Surface and Profile Processing | PRDC/PRGC/SVVB for Combined Machining, for Outer Diameter / End Face / Profile Machining | SVPB for Combined Machining, for End Face / Profile Machining | Holder for Outer Diameter Machining (Wedge Clamp) SVJNR/L-F, SVVNN (Screw Clamp) | SVJB-FF Type (not offset) (outer diameter, profile machining) | SVJP-FF Type (not offset) (outer diameter, profile machining) | SVLP-FF Type (not offset) (outer diameter, profile machining) | SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining) | Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL | Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVVNN | Cutting Head, Outer Diameter Turning Positive Inserts, CoroTurn, C3-SVHBR/L-22040-11 | Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR/L | Outer Diameter Turning - Tool Bit For Positive Inserts, Shank Tool Bit, TR-V13JBR/L-S | Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1 | Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJCR/L-E11HP | Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVVBN1616E11 | Shank Tool Bit, Outer Diameter Turning Compact Lathes, CoroTurn, 107, SVABR/LKS | Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13JBR/L | Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13MBL | Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-V13VBN | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-11 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S | ||||||||||||||||||||||||||||||||||
| From | ฿ 9,280.00 | ฿ 3,056.63 | ฿ 3,844.00 | ฿ 5,251.00 | ฿ 5,251.00 | ฿ 5,251.00 | ฿ 2,500.00 | ฿ 6,777.00 | ฿ 3,393.00 | ฿ 5,202.00 | ฿ 5,129.00 | ฿ 5,606.00 | ฿ 4,800.00 | ฿ 5,114.00 | ฿ 7,550.00 | ฿ 3,932.00 | ฿ 3,025.27 | ฿ 3,025.27 Special Price On Sale Until 31/03/2025 | ฿ 3,119.35 | ฿ 5,000.85 | ฿ 2,554.89 | ฿ 6,715.00 | ฿ 3,393.00 | ฿ 6,777.00 | ฿ 6,521.00 | ฿ 5,606.00 | ฿ 4,800.00 | ฿ 4,800.00 | ฿ 7,292.00 | ฿ 5,595.00 | ฿ 5,251.00 | ฿ 8,031.00 | ฿ 6,041.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 4,360.00 | ฿ 3,652.44 | ฿ 4,593.19 | ฿ 4,593.19 | ฿ 3,521.92 | ฿ 3,063.41 | ฿ 2,200.00 | ฿ 3,025.27 | ฿ 2,962.55 | ฿ 2,711.00 | ฿ 2,805.76 | ฿ 12,091.00 | ฿ 7,895.93 | ฿ 29,945.81 | ฿ 17,204.72 | ฿ 24,225.32 | ฿ 12,091.00 | ฿ 41,698.81 | ฿ 12,836.35 | ฿ 12,836.35 | ฿ 9,560.07 | ฿ 7,063.86 | ฿ 7,739.92 | ฿ 14,583.00 | ฿ 14,583.00 | ฿ 14,583.00 | ฿ 13,060.00 | ฿ 5,650.00 | ฿ 7,251.00 | ฿ 7,251.00 | ฿ 14,916.53 | ฿ 7,687.91 | ฿ 5,650.00 | ฿ 14,583.00 | ฿ 16,213.00 | ฿ 15,488.58 | ฿ 5,650.00 | ฿ 5,650.00 | ฿ 9,528.97 | ฿ 9,227.45 | ฿ 12,061.78 | ฿ 6,513.73 |
| Days to Ship | 7 Day(s) | 7 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 5 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 7 Day(s) | Same day | 7 Day(s) | 8 Day(s) | 5 Day(s) | 6 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 20 Day(s) | 8 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | Quote | Quote | Quote | Quote | 20 Day(s) | 7 Day(s) | 6 Day(s) | 8 Day(s) | 6 Day(s) | 8 Day(s) | 6 Day(s) | 5 Day(s) | 5 Day(s) | 7 Day(s) | 7 Day(s) | 6 Day(s) | 8 Day(s) | 6 Day(s) | 8 Day(s) | 8 Day(s) | 6 Day(s) | 8 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 8 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 8 Day(s) | 6 Day(s) | 8 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 6 Day(s) | 14 Day(s) | 14 Day(s) | 14 Day(s) | 6 Day(s) |
| Applicable Tip Shape | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) |
| Applicable Chip Clearance Angle | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Pozidriv | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | Negative | Pozidriv | Pozidriv | - | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Pozidriv | Pozidriv | Negative | Negative | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | - | Pozidriv | - | - | Negative | - | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | - | - | - | - | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | - | - | - |
| Selfishly | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand | No-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | No-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Left-hand | Left-hand | Right-hand |
| Application | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | End Face / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling / Post-Grinding | Profiling | Profiling | Profiling | Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | End Face / Profiling | End Face / Profiling | Outer Diameter / Profiling / Post-Grinding | Outer Diameter | Outer Diameter / Post-Grinding | Outer Diameter | End Face / Profiling | End Face / Profiling | Outer Diameter | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling / Chamfer | - | Outer Diameter / Profiling / Chamfer | Outer Diameter / Post-Grinding | Outer Diameter / Profiling / Chamfer / Post-Grinding | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer / Post-Grinding | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer / Post-Grinding | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Chamfer / Post-Grinding | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | Outer Diameter | Post-Grinding | - | - |
| Clamp Shape | Screw-on | Back Surface Clamp | Screw-on | Lever lock | Lever lock | Cable clamp | Screw-on | Other | Screw-on | Other | Screw-on | Screw-on | Cable clamp | Screw-on | Screw-on | Screw-on | Cable clamp | Cable clamp | Pin Lock | Screw-on | Screw-on | Clamp-on | Screw-on | Other | Screw-on | Screw-on | Cable clamp | Cable clamp | Clamp-on | Screw-on | Cable clamp | Clamp-on | - | - | Screw-on | Screw-on | Screw-on | Screw-on | Cable clamp | Double Clamp | Double Clamp | Pin Lock | Pin Lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | - | - | Clamp-on | - | Clamp-on | Double Clamp | Clamp-on | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Cable clamp / Other | - | - | - |
| Shank height(mm) | 17 ～ 23 | - | 10 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 10 ～ 25 | 20 ～ 32 | 10 ～ 16 | 20 ～ 32 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 16 ～ 25 | 16 ～ 25 | 20 ～ 25 | - | - | - | - | - | 20 ～ 32 | 10 ～ 16 | 20 ～ 32 | 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 20 ～ 25 | 20 ～ 25 | 7 ～ 12 | 8 ～ 16 | 10 ～ 16 | 10 ～ 16 | - | - | 25 | - | - | - | 20 ～ 25 | - | - | - | - | - | - | - | 40 | - | - | - | - | - | - | - | 32 ～ 40 | 32 ～ 40 | 32 ～ 40 | - | - | - | - | - | 12 | - | 10 ～ 16 | 8.3 | 8 ～ 16 | - | - | - | - | 8 | - | - | - | - |
| Shank width(mm) | 17 ～ 23 | - | 10 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 10 ～ 25 | 20 ～ 32 | 10 ～ 16 | 20 ～ 32 | 16 ～ 25 | 20 ～ 25 | 20 ～ 25 | 16 ～ 25 | 16 ～ 25 | 20 ～ 25 | - | - | - | - | - | 20 ～ 25 | 10 ～ 16 | 20 ～ 25 | 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 25 | 20 ～ 25 | 20 ～ 25 | 7 ～ 12 | 10 ～ 16 | 10 ～ 16 | 10 ～ 16 | - | - | 25 | - | - | - | 20 ～ 25 | - | - | - | - | - | - | - | 25 | - | - | - | - | - | - | - | 32 ～ 40 | 25 ～ 40 | 25 ～ 40 | - | - | - | - | - | 12 | - | 10 ～ 16 | 16 | 10 ～ 16 | - | - | - | - | - | - | - | - | - |
Loading...
Related Categories to Holding Tools for O.D. Tuning
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?