2-Color Display Digital Pressure Sensor Controller PSE300 Series

Brand :

SMC

Caution

See catalog for specification details.
Product images may be representative images. Refer to the catalog for details.

Product Description

2-Color Display Digital Pressure Sensor Controller PSE300 Series with auto-shift.
[Features]
· Auto-preset function / Display value calibration function / Peak hold and display function.
· Keylock function / Zero-clear function / Error display function / Unit switching function / Anti-chattering function.

2-Color Display Digital Pressure Sensor Controller PSE300 Series Details

2-Color Display Digital Pressure Sensor Controller PSE300 Series product image (1)

2-Color Display Digital Pressure Sensor Controller PSE300 Series product image (2)

2-Color Display Digital Pressure Sensor Controller PSE300 Series Specifications

Model Number Notation

Model number example

Model		PSE3□□
Applicable pressure sensors		PSE533 PSE543 PSE563 PSE573	PSE531 PSE541 PSE561	PSE532	PSE530 PSE540 PSE560 PSE570	PSE564 PSE574	PSE550
Display / Set pressure (differential pressure) range		-101 to 101 kPa	-10 to 101 kPa	-10 to 101 kPa	-0.1 to 1 MPa	-50 to 500 kPa	-0.2 to 2 kPa
Display / Set resolution		0.2 kPa	0.1 kPa	0.1 kPa	0.001 MPa	1 kPa	0.01 kPa
Pressure range setting^{Note 1)}		For compound pressure	For vacuum pressure	For low pressure	For positive pressure		For low differential pressure
Rated pressure (differential pressure) range		-100 to 100 kPa	0 to -101 kPa	0 to 100 kPa	0 to 1 MPa	0 to 500 kPa	0 to 2 kPa
Extended analog output range^{Note 2)}		-	10.1 to 0 kPa	-10 to 0 kPa	-0.1 to 0 MPa	-50 to 0 kPa	-0.2 to 0 kPa
Power supply voltage		12 to 24 V DC ±10%, Ripple (p-p) 10% or less (with reverse connection protection)
Current Consumption		50 mA or less (Current consumption for sensor is not included)
Sensor input	-	PSE30□: Voltage input 1 to 5 V DC (Input impedance: 1 MΩ) PSE31□: Current input 4 to 20 mA DC (Input impedance: 100 Ω)
	Number of inputs	1 input
	Input protection	With excess voltage protection (Up to 26.4 V)
Hysteresis		Hysteresis mode: variable, Window comparator mode: variable
Switch output	-	NPN or PNP open collector output, 2 outputs
	Max Load Current	80 mA
	Maximum load voltage	30 V DC (at NPN output)
	Residual Voltage	1 V or less (with load current of 80 mA)
	Output protection	With short-circuit protection
Response time	-	1 ms or less
Response time	Anti-chattering function	Response time settings for anti-chattering function: 20 ms, 160 ms, 640 ms, 1,280 ms
Repeat accuracy		±0.1% F.S.
Analog Output	Voltage output^{Note 2)}	Output voltage: 1 to 5 V (within rated pressure [differential pressure] range), 0.6 to 1 V (within extended analog output range), Output impedance: approx. 1 kΩ, Linearity: ±0.2% F.S. (not including sensor accuracy), Response speed: 150 ms or less
	Accuracy (to display value) (25°C)	±0.6% F.S.				±1.0% F.S.	±1.5% F.S.
	Current output^{Note 2)}	Output current: 4 to 20 mA (within rated pressure [differential pressure] range), 2.4 to 4 mA (within extended analog output range), Maximum load impedance: 300 Ω (at 12 V DC), 600 Ω (at 24 V DC), Minimum load impedance: Output impedance: 50 Ω, Linearity: ±0.2% F.S. (not including sensor accuracy), Response time: 150 ms or less
	Accuracy (to display value) (25°C)	±1.0% F.S.				±1.5% F.S.	±2.0% F.S.
Display accuracy (ambient temperature of 25°C)		±0.5% F.S. ±2 digits	±0.5% F.S. ±1 digit
Display Method		3 + 1/2 digit 7-segment indicator, 2-color display (red/green), Sampling frequency: 5 times / sec
Status LEDs		OUT1: Lights up when output is turned ON (green), OUT2: Lights up when output is turned ON (red)
Auto-shift input^{Note 2)}		Non-voltage input (reed or solid state), Low level input 5 ms or more, Low level 0.4 V or less
Environmental resistance	Enclosure	IP40
	Operating temperature range	During operation: 0 to 50°C, During storage: -10 to 60°C (No freezing or condensation)
	Operating Humidity Range	During operation, storage: 35 to 85% RH (No condensation)
	Withstand Voltage	1,000 V AC for 1 min. between terminals and housing
	Insulation Resistance	50 MΩ or more (500 V DC, measured via megohmmeter) between terminals and housing
Temperature characteristics		±0.5% F.S. (25°C reference)
Connection		PSE3□□: Power supply / output connection: 5P connector, Sensor connection: 4P connector, PSE3□□T: Terminal block
Material		Front case: PBT, Rear case: PBT (PSE3□□), modified PPE (PSE3□□T)
Weight	Including power supply / output connection cable	PSE3□□: 85 g
Weight	Not including power supply / output connection cable	PSE3□□: 30 g, PSE3□□T: 50 g
Power supply / Output connection cable		Oilproof heavy-duty vinyl cable, 5 cores ø4.1 (4.1 mm diameter) 2 m, Conductor area: 0.2 mm² Insulator O.D.: 1.12 mm
Standard		CE UL/CSA (E216656)

Note 1) Pressure range can be selected during initial setting.
Note 2) Auto-shift input function is not available when analog output is selected. Similarly, analog output function is not available when auto-shift function is selected.
Note 3) The following units can be selected with the display unit switching function.

For vacuum/compound pressure: kPa, kgf/cm2, bar, psi, mmHg, inHg
For positive/low pressure: MPa, kPa, kgf/cm2, bar, psi
For low differential pressure: kPa, mmH2O

Analog Output

1 to 5 V DC / 4 to 20 mA DC

Range	Rated pressure range	A	B	E
For vacuum pressure	0 to -101 kPa	0	-101 kPa	10.1 kPa
For compound pressure	-100 kPa to 100 kPa	-100 kPa	100 kPa	-
For low pressure	0 to 100 kPa	0	100 kPa	-10 kPa
For positive pressure	0 to 1 MPa	0	1 MPa	-0.1 MPa
For positive pressure	0 to 500 kPa	0	500 kPa	-50 kPa

Range	Rated pressure range	C	D	F
For low differential pressure	0 to 2 kPa	0	2 kPa	-0.2 kPa

Internal Circuits and Wiring Examples

PSE3□0(T)-□□□□ / PSE3□1(T)-□□□□

2-Color Display Digital Pressure Sensor Controller PSE300 Series Example Dimensions

PSE3□□

(Unit: mm)

PSE3□□ dimensional diagram