Single-Action Push Catch C-71
Caution
Product Description
A catch with a spring which can be installed and used at places where magnets are not used, making installation possible in locations unsuitable for magnets.
[Features]
· If you push the door slightly, it will close, and if you push it again, it will open by the spring operation.
· Does not use a magnet, making it ideal for locations unideal for magnets.
· The spring is made from stainless steel with excellent corrosion-resistance.
· Can be used for both external applications such as on fuel filler ports, and internal applications such as on refrigerators.
[Applications]
· Used in specially equipped vehicles, containers, vibrating equipment, interiors and exteriors of buses, various cabinet doors.
Spring Catch That Opens And Closes With A Light Push. Magnets Are Not Used, Making Installation Possible In Locations Unsuitable For Magnets
C-71 external appearance
The door closes with a light push, and springs open when pushed again.
Does not use a magnet, making it ideal for locations unsuitable for magnets.
The spring is made from stainless-steel with excellent corrosion resistance.
Can be used for both external applications such as on fuel filler ports, and internal applications such as on service boxes.
C-71 dimensional drawing (mm)
- Main body material: polyacetal (POM)
- Bracket material: stainless-steel plate (SUS304)
- Holding force: 78 N
C-71 application example
Other special purpose vehicles, containers, vibration equipment, bus interiors and exteriors, doors on various cabinets.
C-71 operation drawing
- 1.When starting
Push the bracket in from position 1 to position 2. Spring action will hold the bracket in position 3. - 2.When releasing
Push the bracket in from position 3 to position 2. Spring action will release the bracket to position 1.
- *To reach position 2, push firmly as far as it will go. If not pushed far enough, malfunction may occur.