E2E Standard Type Proximity Sensor

Brand :

OMRON

Caution

Product Description

If you are looking for a proximity sensor, the E2E should be your first step.
[Features]
· The standard for detecting the presence of magnetic metals.
· Wide variety of types available.
Select the most appropriate model for the given conditions.
· For dealing with mutual interference, different frequency type also available.
· Displays excellent environmental resistance.
The standard cable is made of oil-resistant PVC.
The sensing surface is made of a material that is strong against machining oil.
· A cord protector to prevent wire breakage is used as standard.

Dimensional Drawing of OMRON Proximity Sensors

Pull-Out Cord Type OMRON Proximity Sensors (Shielded Type)

Pre-Wired Type OMRON Proximity Sensors (Non-Shielded Type)

Standard type proximity sensor E2E Pre-wired type (shielded type) outline drawing

Standard type proximity sensor E2E Pre-wired type (non-shielded type) outline drawing

*1.Vinyl insulated round cord φ4, 2-core (conductor cross-sectional area: 0.3mm², Proximity Sensors insulator diameter: φ1.3mm) standard 2mVinyl
    insulated round cord φ4, 3-core (conductor cross-sectional area: 0.3mm², insulator diameter: φ1.3mm) standard 2mBend-
    resistant cord type is
    vinyl insulated round cord φ4, 2-core (conductor cross-sectional area: 0.3mm², insulator diameter: φ1.27mm) standard 2mVinyl
    insulated round cord φ4, 3-core (conductor cross-sectional area: 0.3mm², Proximity Sensors insulator diameter: φ1.27mm) standard 2mOil-
    resistant reinforced cord type is
    polyurethane insulated round cord φ4, 2-core (conductor cross-sectional area: 0.3mm², insulator diameter: φ1.3mm)
    standard 2mCord
    extension (single metal conduit) up to 200m
*2.D1 type: operation indicator (red), setting indicator (green), D2/E/F type: operation indicator (red)
* For information on model numbers other than those listed above, please refer to the digital catalog.

*1.Vinyl insulated round cord φ4, 2 cores (conductor cross-sectional area: 0.3mm², insulator diameter: φ1.3mm) standard length
    2mVinyl insulated round cord φ4, 3 cores (conductor cross-sectional area: 0.3mm², Proximity Sensors insulator diameter: φ1.3mm) standard length 2mFlexible
    cord type is
    vinyl insulated round cord φ4, 2 cores (conductor cross-sectional area: 0.3mm², insulator diameter: φ1.27mm) standard length
    2mVinyl insulated round cord φ4, 3 cores (conductor cross-sectional area: 0.3mm², Proximity Sensors insulator diameter: φ1.27mm) standard length 2mCord
    extension (single metal conduit) maximum 200m
*2.D1 type: operation indicator (red), setting indicator (green), D2/E/F types: operation indicator (red)
* For information on model numbers other than those mentioned above, please refer to the digital catalog.

Specification Table of OMRON Proximity Sensors

OMRON Proximity Sensors Ratings/Performance

Proximity Sensors DC 2-wire type (E2E-X□D□)

Proximity Sensors item	size	M8		M12		M18		M30
	shield	shield	Unshielded	shield	Unshielded	shield	Unshielded	shield	Unshielded
	Model number	Model E2E-X2D□	Model E2E-X4MD□	Model E2E-X3D□	Model E2E-X8MD□	Model E2E-X7D□	Model E2E-X14MD□	Model E2E-X10D□	Model E2E-X20MD□
Proximity Sensors Detection distance		2mm±10%	4mm±10%	3mm±10%	8mm±10%	7mm±10%	14mm±10%	10mm±10%	20mm±10%
Set distance*1		0 to 1.6 mm	0 to 3.2 mm	0 to 2.4 mm	0 to 6.4 mm	0 to 5.6 mm	0 to 11.2 mm	0 to 8 mm	0 to 16 mm
Hysteresis		15% or less of detection distance		10% or less of the detection distance
Detectable Objects		Magnetic metal (non-magnetic metal reduces the detection distance.
Standard detection object		Iron 8×8×1mm	Iron 20 x 20 x 1 mm	Iron 12 x 12 x 1 mm	Iron 30×30×1mm	Iron 18 x 18 x 1 mm	Iron 30×30×1mm		Iron 54×54×1mm
Response frequency*2		1.5kHz	1kHz		0.8kHz	0.5kHz	0.4kHz		0.1kHz
Power supply voltage (operating voltage range)		Proximity Sensors Standard type: DC12 to 24V ripple (pp) 10% or less (DC10 to 30V) When using US type or connector type as UL certified product: DC12 to 24V ripple (pp) 10% or less (usage voltage range is also the same)
Leakage current		0.8mA or less
Control Output	Opening and closing capacity	3 to 100mA, diagnostic output 50mA [D1(5) S type only]
Control Output	Residual voltage*3	3V or less (load current 100mA, cord length 2m, except M1J-T type only 5V or less)
Indicator Light		D1 type: Operation indicator (red), setting indicator (green) D2 type: Operation indicator (red)
Operation mode (when detecting object approaching)		D1 type: NO D2 type: NC
Diagnostic output delay time		0.3 to 1 s
Protection Circuit		Surge absorption, load short circuit protection (both control output and diagnostic output)
Ambient Temperature Range		Operating: -25 to +70°C Storage: -40 to +85°C (but do not freeze or condense)
Ambient Humidity Range		During operation and storage: 35 to 95% RH (but no condensation)
Temperature effects		Within ±15% of detection distance at +23°C within the temperature range of -25 to +70°C		Within ±10% of detection distance at +23°C within the temperature range of -25 to +70°C
Voltage Effects		Within ±1% of detection distance at rated power supply voltage within ±15% range
Insulation resistance		50MΩ or more (DC500V megger) between live parts and case
Withstand voltage		AC1,000V 50/60Hz 1min Between live parts and case
Vibration (durability)		10 to 55Hz, double amplitude 1.5mm, 2h each in X, Y, and Z directions
Impact (durability)		500m/s² 10 times each in X, Y, and Z directions		1,000m/s² 10 times each in X, Y, and Z directions
Protective structure		Pre-wired type, connector relay type: IEC standard IP67 Connector type: IEC standard IP67
Connection method		Pre-wired type (standard cord length 2m), connector type, relay connector type (standard cord length 300mm)
Weight (packaged )	Cord pull-out type	Approx. 60g		Approx. 70g		Approx. 130g		Approx. 175g
	Connector relay type	-		Approx. 40g		Approx. 70g		Approx. 110g
	Connector Type	Approx. 15g		Approx. 25g		Approx. 40g		Approx. 90g
Material	case	Stainless steel (SUS303)		Brass, nickel plated
	Detection surface	PBT
	Clamping Nut	Brass, nickel plated
	Toothed washer	Iron Zinc plating
accessories		operating instructions

*1. The Proximity Sensors Use within the range where the green indicator light is on. (Excluding D2 type)
*2. The response frequency of the Proximity Sensors is an average value.
Measurement conditions are as follows: A standard detection object is used, the detection object interval is twice that of the standard detection object, and the set distance is 1/2 the detection distance.
*3. When using the M1J-T type, the residual voltage is 5V, so please check the interface conditions with the connected device before use.
* For information on model numbers other than those listed above, please refer to the digital catalog.

OMRON Proximity Sensors

Catalog product information of Proximity Sensors click here