(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
ball spline with stepped female threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.
Part Number |
---|
BSLS8-[60-600/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
BSLS8G-[60-600/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
BSLS8L-[60-600/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3 |
BSLS10-[60-800/1]-F[2-40/1]-E[2-40/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
BSLS10G-[60-800/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
BSLS10L-[60-800/1]-F[2-31/1]-E[2-31/1]-P[6,8]-Q[6,8]-M[3,4]-N[3,4] |
BSLS13-[60-800/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
BSLS13G-[60-800/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
BSLS13L-[60-800/1]-F[2-50/1]-E[2-50/1]-P[6,8,10]-Q[6,8,10]-M[3,4,5,6]-N[3,4,5,6] |
BSLS16-[70-1000/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
BSLS16G-[70-1000/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
BSLS16L-[70-1000/1]-F[2-65/1]-E[2-65/1]-P[6,8,10,12,13]-Q[6,8,10,12,13]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10] |
BSLS20-[80-1000/1]-F[2-80/1]-E[2-80/1]-P[8,10,12,13,15,16]-Q[8,10,12,13,15,16]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
BSLS20G-[80-1000/1]-F[2-80/1]-E[2-80/1]-P[8,10,12,13,15,16]-Q[8,10,12,13,15,16]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
BSLS20L-[80-1000/1]-F[2-80/1]-E[2-80/1]-P[8,10,12,13,15,16]-Q[8,10,12,13,15,16]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
BSLS25-[90-1300/1]-F[2-100/1]-E[2-100/1]-P[8,10,12,13,15,16,20]-Q[8,10,12,13,15,16,20]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
BSLS25G-[90-1300/1]-F[2-100/1]-E[2-100/1]-P[8,10,12,13,15,16,20]-Q[8,10,12,13,15,16,20]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
BSLS25L-[90-1300/1]-F[2-100/1]-E[2-100/1]-P[8,10,12,13,15,16,20]-Q[8,10,12,13,15,16,20]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
BSLS30-[100-1300/1]-F[2-125/1]-E[2-125/1]-P[10,12,13,15,16,20,25]-Q[10,12,13,15,16,20,25]-M[4,5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16,20] |
BSLS30G-[100-1300/1]-F[2-125/1]-E[2-125/1]-P[10,12,13,15,16,20,25]-Q[10,12,13,15,16,20,25]-M[4,5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16,20] |
BSLS30L-[100-1300/1]-F[2-125/1]-E[2-125/1]-P[10,12,13,15,16,20,25]-Q[10,12,13,15,16,20,25]-M[4,5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16,20] |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Nut Type | Shaft Outer Dia. D (Ø) | Nut Overall Length (mm) | Nut O.D. (Ø) | Shaft material | Shaft Overall Length L (mm) | Basic Load Rating: Dynamic Load (N) | Allowable Torque (N•m) | Nut Material | Grease | E (mm) | F (mm) | M (mm) | N (mm) | P (mm) | Q (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | BALL SPLINE | 1 Piece(s) | 8 Day(s) | 10 | Straight | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 600 | 1200 | 4.8 | SCM415 Equivalent | Standard (S2) | 2 ~ 30 | 2 ~ 30 | 3 | 3 | 6 | 6 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 600 | 1200 | 4.8 | SCM415 Equivalent | LG2 | 2 ~ 30 | 2 ~ 30 | 3 | 3 | 6 | 6 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 8 | 25 | 16 | SUJ2 Equivalent | 60 ~ 600 | 1200 | 4.8 | SCM415 Equivalent | ET-100K | 2 ~ 30 | 2 ~ 30 | 3 | 3 | 6 | 6 | ||
- | BALL SPLINE | 1 Piece(s) | 8 Day(s) | 10 | Straight | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ~ 800 | 3800 | 19 | SCM415 Equivalent | Standard (S2) | 2 ~ 40 | 2 ~ 40 | 3 ~ 4 | 3 ~ 4 | 6 ~ 8 | 6 ~ 8 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ~ 800 | 3800 | 19 | SCM415 Equivalent | LG2 | 2 ~ 31 | 2 ~ 31 | 3 ~ 4 | 3 ~ 4 | 6 ~ 8 | 6 ~ 8 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 10.4 | 40 | 21 | SUJ2 Equivalent | 60 ~ 800 | 3800 | 19 | SCM415 Equivalent | ET-100K | 2 ~ 31 | 2 ~ 31 | 3 ~ 4 | 3 ~ 4 | 6 ~ 8 | 6 ~ 8 | ||
- | BALL SPLINE | 1 Piece(s) | 8 Day(s) | 10 | Straight | 13.4 | 44 | 24 | SUJ2 Equivalent | 60 ~ 800 | 4600 | 28 | SCM415 Equivalent | Standard (S2) | 2 ~ 50 | 2 ~ 50 | 3 ~ 6 | 3 ~ 6 | 6 ~ 10 | 6 ~ 10 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 13.4 | 44 | 24 | SUJ2 Equivalent | 60 ~ 800 | 4600 | 28 | SCM415 Equivalent | LG2 | 2 ~ 50 | 2 ~ 50 | 3 ~ 6 | 3 ~ 6 | 6 ~ 10 | 6 ~ 10 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 13.4 | 44 | 24 | SUJ2 Equivalent | 60 ~ 800 | 4600 | 28 | SCM415 Equivalent | ET-100K | 2 ~ 50 | 2 ~ 50 | 3 ~ 6 | 3 ~ 6 | 6 ~ 10 | 6 ~ 10 | ||
- | BALL SPLINE | 1 Piece(s) | 8 Day(s) | 10 | Straight | 16.6 | 50 | 31 | SUJ2 Equivalent | 70 ~ 1000 | 6200 | 51 | SCM415 Equivalent | Standard (S2) | 2 ~ 65 | 2 ~ 65 | 3 ~ 10 | 3 ~ 10 | 6 ~ 13 | 6 ~ 13 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 16.6 | 50 | 31 | SUJ2 Equivalent | 70 ~ 1000 | 6200 | 51 | SCM415 Equivalent | LG2 | 2 ~ 65 | 2 ~ 65 | 3 ~ 10 | 3 ~ 10 | 6 ~ 13 | 6 ~ 13 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 16.6 | 50 | 31 | SUJ2 Equivalent | 70 ~ 1000 | 6200 | 51 | SCM415 Equivalent | ET-100K | 2 ~ 65 | 2 ~ 65 | 3 ~ 10 | 3 ~ 10 | 6 ~ 13 | 6 ~ 13 | ||
- | BALL SPLINE | 1 Piece(s) | 8 Day(s) | 10 | Straight | 20.6 | 63 | 35 | SUJ2 Equivalent | 80 ~ 1000 | 8500 | 85 | SCM415 Equivalent | Standard (S2) | 2 ~ 80 | 2 ~ 80 | 4 ~ 12 | 4 ~ 12 | 8 ~ 16 | 8 ~ 16 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 20.6 | 63 | 35 | SUJ2 Equivalent | 80 ~ 1000 | 8500 | 85 | SCM415 Equivalent | LG2 | 2 ~ 80 | 2 ~ 80 | 4 ~ 12 | 4 ~ 12 | 8 ~ 16 | 8 ~ 16 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 20.6 | 63 | 35 | SUJ2 Equivalent | 80 ~ 1000 | 8500 | 85 | SCM415 Equivalent | ET-100K | 2 ~ 80 | 2 ~ 80 | 4 ~ 12 | 4 ~ 12 | 8 ~ 16 | 8 ~ 16 | ||
- | BALL SPLINE | 1 Piece(s) | 8 Day(s) | 10 | Straight | 25.8 | 71 | 42 | SUJ2 Equivalent | 90 ~ 1300 | 15400 | 193 | SCM415 Equivalent | Standard (S2) | 2 ~ 100 | 2 ~ 100 | 4 ~ 16 | 4 ~ 16 | 8 ~ 20 | 8 ~ 20 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 25.8 | 71 | 42 | SUJ2 Equivalent | 90 ~ 1300 | 15400 | 193 | SCM415 Equivalent | LG2 | 2 ~ 100 | 2 ~ 100 | 4 ~ 16 | 4 ~ 16 | 8 ~ 20 | 8 ~ 20 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 25.8 | 71 | 42 | SUJ2 Equivalent | 90 ~ 1300 | 15400 | 193 | SCM415 Equivalent | ET-100K | 2 ~ 100 | 2 ~ 100 | 4 ~ 16 | 4 ~ 16 | 8 ~ 20 | 8 ~ 20 | ||
- | BALL SPLINE | 1 Piece(s) | 8 Day(s) | 10 | Straight | 30.8 | 80 | 47 | SUJ2 Equivalent | 100 ~ 1300 | 18500 | 272 | SCM415 Equivalent | Standard (S2) | 2 ~ 125 | 2 ~ 125 | 4 ~ 20 | 4 ~ 20 | 10 ~ 25 | 10 ~ 25 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 30.8 | 80 | 47 | SUJ2 Equivalent | 100 ~ 1300 | 18500 | 272 | SCM415 Equivalent | LG2 | 2 ~ 125 | 2 ~ 125 | 4 ~ 20 | 4 ~ 20 | 10 ~ 25 | 10 ~ 25 | ||
- | BALL SPLINE | 1 Piece(s) | 10 Day(s) | 10 | Straight | 30.8 | 80 | 47 | SUJ2 Equivalent | 100 ~ 1300 | 18500 | 272 | SCM415 Equivalent | ET-100K | 2 ~ 125 | 2 ~ 125 | 4 ~ 20 | 4 ~ 20 | 10 ~ 25 | 10 ~ 25 |
Loading...
Type | Solid Shaft | Nut Length | Standard | Preload | Standard |
---|---|---|---|---|---|
Accuracy Grade | Standard Grade | End Shape (Left) | Stepped and Tapped | End Shape (Right) | Stepped and Tapped |
Torque | Middle Torque | Ball Recirculating Type | Single |
How can we improve?
How can we improve?