1. No. of part number of this product, can see and select from the list here
Skip Next >>
2. Or select spec by configure tab until part number generated
Skip << Back Next >>
3. Product information available in this area
Skip << Back Close

(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading...

Categories

Search by Category

Brand

Categories

Search by Category

Brand
Quote/ Order
promote-app
MISUMI App QR Code Click for More Details
    Sales
  • Viewed
    Products
  • My
    Components
  • Cart
Recently Viewed Products
X
My Components
X
Cart Item(s)
X
Loading...
  • แจ้งวันหยุดทำการในเดือน ตุลาคม 2567 | Notice holiday in October 2024 > คลิก
  • การยกเลิกจำหน่ายสินค้าประเภทอุปกรณ์นิวเมติกส์ (Pneumatic equipment) รุ่น “Economy Series”​ | Notice of End of Sales for Economy Series Pneumatic Equipment Category > คลิก

  • How can we improve?

    How can we improve?

    * This form is only for feedback/comment on our website and service
    Feedback
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    Your feedback is essential for our continuous improvement

    Thank you for your cooperation.

    Your feedback is essential for our continuous improvement.

Configure

Clear All

Part number has not been determine

(4,691 Part Numbers Available)
Configure Remaining Specifications

Part Number Complete

VFAD4-[25-195/1]-F[5-15/1]-B0-P3-M[0,3]-J2
loading

Specification/Dimensions

  • Basic Shape

    • One End Stepped
    • Both Ends Stepped

    Clear

  • End Shape (Right)

    • No Machining
    • Tapped
    • Threaded

    Clear

  • Material

    • Steel
      • SUJ2 Equivalent
    • Stainless Steel
      • SUS440C or 13Cr stainless

    Clear

  • Surface Treatment

    • Not Provided
    • Low Temperature Black Chrome Plating

    Clear

  • Shaft Dia. D(Ø)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 18
    • 20
    • 25
    • 30

    Clear

  • Length L(mm)

     [25-445/1mm Unit(s)]

    Clear

  • Hardness

    • Induction Hardened (56HRC~)
    • Induction Hardened (58HRC~)

    Clear

  • Add Wrench Flats at One Location [SC](mm)

     [0-435/1mm Unit(s)]

    Clear

  • B(mm)

    • 0

     [3-72/1mm Unit(s)]

    Clear

  • Change Tapped Thread J to Fine One [JSC](mm)

    • 8
    • 10
    • 12
    • 14
    • 18

    Clear

  • Change Thread M to Fine One [MMC](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 15
    • 17
    • 20
    • 25

    Clear

  • Change Thread M to Fine One [MMS](mm)

    • 10
    • 12
    • 14
    • 18

    Clear

  • Change Thread N to Fine One [NMC](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 15
    • 17
    • 20
    • 25

    Clear

  • Change Thread N to Fine One [NMS](mm)

    • 10
    • 12
    • 14
    • 18

    Clear

  • F(mm)

     [5-145/1mm Unit(s)]

    Clear

  • P(mm)

    • 3
    • 4
    • 5
    • 6
    • 7

     [4-29/1mm Unit(s)]

    Clear

  • Q(mm)

    • 3
    • 4
    • 5
    • 6
    • 7

     [4-29/1mm Unit(s)]

    Clear

  • S(mm)

    • 0

     [3-72/1mm Unit(s)]

    Clear

  • T(mm)

     [5-145/1mm Unit(s)]

    Clear

  • Tapped (Coarse, Effective Length: Nominal Dia. x 2) [J](mm)

    • 2
    • 2.6
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • Threaded (Coarse) [M](mm)

    • 0
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24

    Clear

  • Threaded (Coarse) [N](mm)

    • 0
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24

    Clear

  • type

    • VFAD
    • VFAM
    • VFAN
    • VFPD
    • VFPM
    • VFPN
    • VRAD
    • VRAM
    • VRAN
    • VRPD
    • VRPM
    • VRPN
    • VSFAD
    • VSFAM
    • VSFAN
    • VSFPD
    • VSFPM
    • VSFPN
    • VSRAD
    • VSRAM
    • VSRAN
    • VSRPD
    • VSRPM
    • VSRPN

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 7 Day(s) or Less
    • 9 Day(s) or Less

    Clear

Specify Alterations

High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped (Part Number)

High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

Click this image to zoom it.

Move the mouse over or click the image to zoom

  • High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped
  • High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped
  • High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MISUMI

Part Number :
4,691 Part Numbers Available

VFAD4-[25-195/1]-F[5-15/1]-B0-P3-M[0,3]-J2

VFAD4-[25-195/1]-F[5-15/1]-B0-P3-MMC3-J2

VFAD4-[25-195/1]-F[5-15/1]-B[3-9/1]-P3-M[0,3]-J2

VFAD4-[25-195/1]-F[5-15/1]-B[3-9/1]-P3-MMC3-J2

VFAD5-[25-295/1]-F[5-20/1]-B0-P[3,4]-M[3,4]-J[2.6,3]

VFAD5-[25-295/1]-F[5-20/1]-B0-P[3,4]-MMC[3,4]-J[2.6,3]

VFAD5-[25-295/1]-F[5-20/1]-B[3-12/1]-P[3,4]-M[3,4]-J[2.6,3]

VFAD5-[25-295/1]-F[5-20/1]-B[3-12/1]-P[3,4]-MMC[3,4]-J[2.6,3]

VFAD6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-M[0,3,4,5]-J3

VFAD6-[25-295/1]-F[5-25/1]-B0-P[3,4,5]-MMC[3,4,5]-J3

VFAD6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-M[0,3,4,5]-J3

VFAD6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,4,5]-MMC[3,4,5]-J3

VFAD8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-M[3,4,5,6]-J[3,4,5]

VFAD8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-MMC[3,4,5,6]-J[3,4,5]

VFAD8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-M[3,4,5,6]-J[3,4,5]

VFAD8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-MMC[3,4,5,6]-J[3,4,5]

VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-M[4,5,6,8]-J[3,4,5,6]

VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-M[4,5,6,8]-ND6

VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,5,6,8]-J[3,4,5,6]

VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,5,6,8]-ND6

VFAD4-[25-195/1]-F[5-15/1]-B0-P3-M[0,3]-J2
VFAD4-[25-195/1]-F[5-15/1]-B0-P3-M[0,3]-J2

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
  • Price :
    ---
  • Qty :
  • Days to Ship :
    ---
  • Total Price :
    ---

Select part number to Order Now/ Add to Cart

PDFP.1-205-2014

Unit examples related to this product
Linear Movement Mechanism
View other unit examples
CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

[Features] Linear motion shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with high perpendicularity accuracy (0.03) and guaranteed coaxiality of 0.02.One end stepped, one end male thread/both ends female thread/one end Male thread/one end female thread/with spanner groove.

 

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
30
60
90
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
VFAD4-[25-195/1]-F[5-15/1]-B0-P3-M[0,​3]-J2
VFAD4-[25-195/1]-F[5-15/1]-B0-P3-MMC3-J2
VFAD4-[25-195/1]-F[5-15/1]-B[3-9/1]-P3-M[0,​3]-J2
VFAD4-[25-195/1]-F[5-15/1]-B[3-9/1]-P3-MMC3-J2
VFAD5-[25-295/1]-F[5-20/1]-B0-P[3,​4]-M[3,​4]-J[2.6,​3]
VFAD5-[25-295/1]-F[5-20/1]-B0-P[3,​4]-MMC[3,​4]-J[2.6,​3]
VFAD5-[25-295/1]-F[5-20/1]-B[3-12/1]-P[3,​4]-M[3,​4]-J[2.6,​3]
VFAD5-[25-295/1]-F[5-20/1]-B[3-12/1]-P[3,​4]-MMC[3,​4]-J[2.6,​3]
VFAD6-[25-295/1]-F[5-25/1]-B0-P[3,​4,​5]-M[0,​3,​4,​5]-J3
VFAD6-[25-295/1]-F[5-25/1]-B0-P[3,​4,​5]-MMC[3,​4,​5]-J3
VFAD6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,​4,​5]-M[0,​3,​4,​5]-J3
VFAD6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,​4,​5]-MMC[3,​4,​5]-J3
VFAD8-[25-295/1]-F[5-30/1]-B0-P[3,​4,​5,​6,​7]-M[3,​4,​5,​6]-J[3,​4,​5]
VFAD8-[25-295/1]-F[5-30/1]-B0-P[3,​4,​5,​6,​7]-MMC[3,​4,​5,​6]-J[3,​4,​5]
VFAD8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,​4,​5,​6,​7]-M[3,​4,​5,​6]-J[3,​4,​5]
VFAD8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,​4,​5,​6,​7]-MMC[3,​4,​5,​6]-J[3,​4,​5]
VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-M[4,​5,​6,​8]-J[3,​4,​5,​6]
VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-M[4,​5,​6,​8]-ND6
VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,​5,​6,​8]-J[3,​4,​5,​6]
VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,​5,​6,​8]-ND6
VFAD10-[25-345/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-M[4,​5,​6,​8]-J[3,​4,​5,​6]
VFAD10-[25-345/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-M[4,​5,​6,​8]-ND6
VFAD10-[25-345/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-MMC[4,​5,​6,​8]-J[3,​4,​5,​6]
VFAD10-[25-345/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-MMC[4,​5,​6,​8]-ND6
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-M[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-M[5,​6,​8,​10]-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-M[5,​6,​8,​10]-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,​6,​8,​10]-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,​6,​8,​10]-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,​6,​8,​10]-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,​6,​8,​10]-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,​6,​8,​10]-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,​6,​8,​10]-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-M[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-M[5,​6,​8,​10]-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-M[5,​6,​8,​10]-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,​6,​8,​10]-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,​6,​8,​10]-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,​6,​8,​10]-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,​6,​8,​10]-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMC[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMC[5,​6,​8,​10]-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMC[5,​6,​8,​10]-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMS10-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMS10-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMS10-ND[6,​8]
VFAD15-[25-345/1]-F[5-70/1]-B0-P[5-14/1]-M[5,​6,​8,​10,​12]-J[4,​5,​6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B0-P[5-14/1]-M[5,​6,​8,​10,​12]-JSC[8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B0-P[5-14/1]-M[5,​6,​8,​10,​12]-ND[6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B0-P[5-14/1]-MMC[5,​6,​8,​10,​12]-J[4,​5,​6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B0-P[5-14/1]-MMC[5,​6,​8,​10,​12]-JSC[8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B0-P[5-14/1]-MMC[5,​6,​8,​10,​12]-ND[6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B0-P[5-14/1]-MMS[10,​12]-J[4,​5,​6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B0-P[5-14/1]-MMS[10,​12]-JSC[8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B0-P[5-14/1]-MMS[10,​12]-ND[6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B[5-60/1]-P[5-14/1]-M[5,​6,​8,​10,​12]-J[4,​5,​6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B[5-60/1]-P[5-14/1]-M[5,​6,​8,​10,​12]-JSC[8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B[5-60/1]-P[5-14/1]-M[5,​6,​8,​10,​12]-ND[6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B[5-60/1]-P[5-14/1]-MMC[5,​6,​8,​10,​12]-J[4,​5,​6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B[5-60/1]-P[5-14/1]-MMC[5,​6,​8,​10,​12]-JSC[8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B[5-60/1]-P[5-14/1]-MMC[5,​6,​8,​10,​12]-ND[6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B[5-60/1]-P[5-14/1]-MMS[10,​12]-J[4,​5,​6,​8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B[5-60/1]-P[5-14/1]-MMS[10,​12]-JSC[8,​10]
VFAD15-[25-345/1]-F[5-70/1]-B[5-60/1]-P[5-14/1]-MMS[10,​12]-ND[6,​8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B0-P[5-15/1]-M[5,​6,​8,​10,​12]-J[4,​5,​6,​8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B0-P[5-15/1]-M[5,​6,​8,​10,​12]-JSC[8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B0-P[5-15/1]-M[5,​6,​8,​10,​12]-ND[6,​8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B0-P[5-15/1]-MMC[5,​6,​8,​10,​12]-J[4,​5,​6,​8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B0-P[5-15/1]-MMC[5,​6,​8,​10,​12]-JSC[8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B0-P[5-15/1]-MMC[5,​6,​8,​10,​12]-ND[6,​8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B0-P[5-15/1]-MMS[10,​12]-J[4,​5,​6,​8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B0-P[5-15/1]-MMS[10,​12]-JSC[8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B0-P[5-15/1]-MMS[10,​12]-ND[6,​8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B[5-36/1]-P[5-15/1]-M[5,​6,​8,​10,​12]-J[4,​5,​6,​8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B[5-36/1]-P[5-15/1]-M[5,​6,​8,​10,​12]-JSC[8,​10]
VFAD16-[25-345/1]-F[5-75/1]-B[5-36/1]-P[5-15/1]-M[5,​6,​8,​10,​12]-ND[6,​8,​10]
Part NumberPriceNameMinimum Order Qty.Volume DiscountDays to ShipRoHSBasic Shape End Shape (Right) Material Surface Treatment Shaft Dia. D
(Ø) 		Length L
(mm) 		Hardness Add Wrench Flats at One Location [SC]
(mm) 		B
(mm) 		Change Tapped Thread J to Fine One [JSC]
(mm) 		Change Thread M to Fine One [MMC]
(mm) 		Change Thread M to Fine One [MMS]
(mm) 		Change Thread N to Fine One [NMC]
(mm) 		Change Thread N to Fine One [NMS]
(mm) 		F
(mm) 		P
(mm) 		Q
(mm) 		S
(mm) 		T
(mm) 		Tapped (Coarse, Effective Length: Nominal Dia. x 2) [J]
(mm) 		Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND]
(mm) 		Threaded (Coarse) [M]
(mm) 		Threaded (Coarse) [N]
(mm)

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided425 ～ 195Induction Hardened (58HRC~)-0-----5 ～ 153---2-0 ～ 3-

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided425 ～ 195Induction Hardened (58HRC~)-0-3---5 ～ 153---2---

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided425 ～ 195Induction Hardened (58HRC~)-3 ～ 9-----5 ～ 153---2-0 ～ 3-

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided425 ～ 195Induction Hardened (58HRC~)-3 ～ 9-3---5 ～ 153---2---

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided525 ～ 295Induction Hardened (58HRC~)-0-----5 ～ 203 ～ 4---2.6 ～ 3-3 ～ 4-

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided525 ～ 295Induction Hardened (58HRC~)-0-3 ～ 4---5 ～ 203 ～ 4---2.6 ～ 3---

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided525 ～ 295Induction Hardened (58HRC~)-3 ～ 12-----5 ～ 203 ～ 4---2.6 ～ 3-3 ～ 4-

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided525 ～ 295Induction Hardened (58HRC~)-3 ～ 12-3 ～ 4---5 ～ 203 ～ 4---2.6 ～ 3---

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided625 ～ 295Induction Hardened (58HRC~)-0-----5 ～ 253 ～ 4---3-0 ～ 5-

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided625 ～ 295Induction Hardened (58HRC~)-0-3 ～ 5---5 ～ 253 ～ 4---3---

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided625 ～ 295Induction Hardened (58HRC~)-3 ～ 12-----5 ～ 253 ～ 4---3-0 ～ 5-

-

LINEAR SHAFT 1 Piece(s) 9 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided625 ～ 295Induction Hardened (58HRC~)-3 ～ 12-3 ～ 5---5 ～ 253 ～ 4---3---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided825 ～ 295Induction Hardened (58HRC~)-0-----5 ～ 303 ～ 7---3 ～ 5-3 ～ 6-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided825 ～ 295Induction Hardened (58HRC~)-0-3 ～ 6---5 ～ 303 ～ 7---3 ～ 5---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided825 ～ 295Induction Hardened (58HRC~)-3 ～ 18-----5 ～ 303 ～ 7---3 ～ 5-3 ～ 6-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided825 ～ 295Induction Hardened (58HRC~)-3 ～ 18-3 ～ 6---5 ～ 303 ～ 7---3 ～ 5---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 454 ～ 9---3 ～ 6-4 ～ 8-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 454 ～ 9----64 ～ 8-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ～ 345Induction Hardened (58HRC~)-0-4 ～ 8---5 ～ 454 ～ 9---3 ～ 6---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ～ 345Induction Hardened (58HRC~)-0-4 ～ 8---5 ～ 454 ～ 9----6--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ～ 345Induction Hardened (58HRC~)-4 ～ 24-----5 ～ 454 ～ 9---3 ～ 6-4 ～ 8-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ～ 345Induction Hardened (58HRC~)-4 ～ 24-----5 ～ 454 ～ 9----64 ～ 8-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ～ 345Induction Hardened (58HRC~)-4 ～ 24-4 ～ 8---5 ～ 454 ～ 9---3 ～ 6---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ～ 345Induction Hardened (58HRC~)-4 ～ 24-4 ～ 8---5 ～ 454 ～ 9----6--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 555 ～ 11---4 ～ 8-5 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-08----5 ～ 555 ～ 11-----5 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 555 ～ 11----6 ～ 85 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-0-5 ～ 10---5 ～ 555 ～ 11---4 ～ 8---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-085 ～ 10---5 ～ 555 ～ 11-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-0-5 ～ 10---5 ～ 555 ～ 11----6 ～ 8--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-0--10--5 ～ 555 ～ 11---4 ～ 8---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-08-10--5 ～ 555 ～ 11-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-0--10--5 ～ 555 ～ 11----6 ～ 8--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-5 ～ 30-----5 ～ 555 ～ 11---4 ～ 8-5 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-5 ～ 308----5 ～ 555 ～ 11-----5 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-5 ～ 30-----5 ～ 555 ～ 11----6 ～ 85 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-5 ～ 30-5 ～ 10---5 ～ 555 ～ 11---4 ～ 8---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-5 ～ 3085 ～ 10---5 ～ 555 ～ 11-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-5 ～ 30-5 ～ 10---5 ～ 555 ～ 11----6 ～ 8--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-5 ～ 30--10--5 ～ 555 ～ 11---4 ～ 8---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-5 ～ 308-10--5 ～ 555 ～ 11-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ～ 345Induction Hardened (58HRC~)-5 ～ 30--10--5 ～ 555 ～ 11----6 ～ 8--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 605 ～ 12---4 ～ 8-5 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-08----5 ～ 605 ～ 12-----5 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 605 ～ 12----6 ～ 85 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-0-5 ～ 10---5 ～ 605 ～ 12---4 ～ 8---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-085 ～ 10---5 ～ 605 ～ 12-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-0-5 ～ 10---5 ～ 605 ～ 12----6 ～ 8--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-0--10--5 ～ 605 ～ 12---4 ～ 8---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-08-10--5 ～ 605 ～ 12-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-0--10--5 ～ 605 ～ 12----6 ～ 8--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-5 ～ 30-----5 ～ 605 ～ 12---4 ～ 8-5 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-5 ～ 308----5 ～ 605 ～ 12-----5 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-5 ～ 30-----5 ～ 605 ～ 12----6 ～ 85 ～ 10-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-5 ～ 30-5 ～ 10---5 ～ 605 ～ 12---4 ～ 8---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-5 ～ 3085 ～ 10---5 ～ 605 ～ 12-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-5 ～ 30-5 ～ 10---5 ～ 605 ～ 12----6 ～ 8--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-5 ～ 30--10--5 ～ 605 ～ 12---4 ～ 8---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-5 ～ 308-10--5 ～ 605 ～ 12-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ～ 345Induction Hardened (58HRC~)-5 ～ 30--10--5 ～ 605 ～ 12----6 ～ 8--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 705 ～ 14---4 ～ 10-5 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-08 ～ 10----5 ～ 705 ～ 14-----5 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 705 ～ 14----6 ～ 105 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-0-5 ～ 12---5 ～ 705 ～ 14---4 ～ 10---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-08 ～ 105 ～ 12---5 ～ 705 ～ 14-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-0-5 ～ 12---5 ～ 705 ～ 14----6 ～ 10--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-0--10 ～ 12--5 ～ 705 ～ 14---4 ～ 10---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-08 ～ 10-10 ～ 12--5 ～ 705 ～ 14-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-0--10 ～ 12--5 ～ 705 ～ 14----6 ～ 10--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-5 ～ 60-----5 ～ 705 ～ 14---4 ～ 10-5 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-5 ～ 608 ～ 10----5 ～ 705 ～ 14-----5 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-5 ～ 60-----5 ～ 705 ～ 14----6 ～ 105 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-5 ～ 60-5 ～ 12---5 ～ 705 ～ 14---4 ～ 10---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-5 ～ 608 ～ 105 ～ 12---5 ～ 705 ～ 14-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-5 ～ 60-5 ～ 12---5 ～ 705 ～ 14----6 ～ 10--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-5 ～ 60--10 ～ 12--5 ～ 705 ～ 14---4 ～ 10---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-5 ～ 608 ～ 10-10 ～ 12--5 ～ 705 ～ 14-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1525 ～ 345Induction Hardened (58HRC~)-5 ～ 60--10 ～ 12--5 ～ 705 ～ 14----6 ～ 10--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 755 ～ 15---4 ～ 10-5 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-08 ～ 10----5 ～ 755 ～ 15-----5 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-0-----5 ～ 755 ～ 15----6 ～ 105 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-0-5 ～ 12---5 ～ 755 ～ 15---4 ～ 10---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-08 ～ 105 ～ 12---5 ～ 755 ～ 15-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-0-5 ～ 12---5 ～ 755 ～ 15----6 ～ 10--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-0--10 ～ 12--5 ～ 755 ～ 15---4 ～ 10---

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-08 ～ 10-10 ～ 12--5 ～ 755 ～ 15-------

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-0--10 ～ 12--5 ～ 755 ～ 15----6 ～ 10--

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-5 ～ 36-----5 ～ 755 ～ 15---4 ～ 10-5 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-5 ～ 368 ～ 10----5 ～ 755 ～ 15-----5 ～ 12-

-

LINEAR SHAFT 1 Piece(s) 7 Day(s) 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1625 ～ 345Induction Hardened (58HRC~)-5 ～ 36-----5 ～ 755 ～ 15----6 ～ 105 ～ 12-

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>

Basic Information

End Shape (Left) Threaded Shaft End Perpendicularity Perpendicularity (0.03) Heat Treatment Induction Hardened
Shaft Fit Tolerance g6

MISUMI Unit Example related to this product

Try to Find Other Examples

back next

Payment Methods

Credit Card
  • VISA
  • MasterCard
  • JCB
Bank
  • SCB
  • Bualuang
  • Krungthai
  • Kasikorn
  • Krungsri
  • Thanachart
  • TMB
Prompt Pay
  • Prompt Pay
  • Prompt Pay QRcode
    Prompt Pay QRcode
Cash
Cash On Delivery

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 8:00 - 18:00 (Mon-Sat),*Order cut off time is 17:00 / Online order cut off time is 18:00

  • Tel:
    033-684730
  • Email: cs@misumi.co.th
View Mode : Mobile

Copyright © MISUMI Corporation All Rights Reserved.