3 Million Products | 1,000 Brands | Free Shipping. Same day shipping 35,000 Stock order before 16:00สินค้า 3 ล้าน รายการ | 1,000 แบรนด์ | จัดส่งฟรี เก็บสต๊อค 35,000 รายการ สั่งก่อน 16:00 ส่งเร็วใน 1 วัน

038-959200

Search by Category / Brand ค้นหาโดย กลุ่มสินค้า / แบรนด์

Search by Category ค้นหาโดยกลุ่มสินค้า
Automation Componentsชิ้นส่วนเครื่องจักรอัตโนมัติ
Fastenersสกรู, โบลท์, แหวน, น็อต
Materialsวัสดุ
Wiring Componentsสายไฟและอุปกรณ์
Electrical & Controlsอุปกรณ์ไฟฟ้าและชุดควบคุม
Cutting Toolsเครื่องมือตัดเจาะ
Processing Toolsเครื่องมือในกระบวนการผลิต
Material Handling & Storageอุปกรณ์ขนย้ายและจัดเก็บ
Safety & General Suppliesความปลอดภัย, อุปกรณ์ทั่วไป
Lab & Clean Room Suppliesอุปกรณ์ห้องแล็บและคลีนรูม
Press Die Componentsชิ้นส่วนแม่พิมพ์โลหะ
Plastic Mold Componentsชิ้นส่วนแม่พิมพ์พลาสติก

Search by Brand ค้นหาโดยแบรนด์
Brand List รายการแบรนด์

How to search product, click here

ค้นหาด้วยภาษาอังกฤษเท่านั้น (ค้นหาไม่เจอ? ที่นี่)

close

Point Tap

Days to Ship
  • ALL
  • 2 Day(s) or Less
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • Point Tap Series, for General, EX-POT

    Point Tap Series, for General, EX-POT

    OSG

    Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

    Days to Ship
    3 Day(s) or more
  • A Tap Series for Pipes Point Tap A-POT

    A Tap Series for Pipes Point Tap A-POT

    OSG

    Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

    Days to Ship
    3 Day(s)
  • Trapezoid Screw Machine Tap

    Trapezoid Screw Machine Tap

    SKC

    Thread Angle TM30°, Thread Angle TW29°

    Days to Ship
    3 Day(s) or more
  • Point Tap PO (N - PO)

    Point Tap PO (N - PO)

    YAMAWA MFG

    * N-PO will be replaced with PO as soon as there is no more in stock.

    Days to Ship
    3 Day(s) or more
  • MT Series High-Speed Steel Point Tap

    MT Series High-Speed Steel Point Tap

    MISUMI

    [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

    • Volume Discount
    Days to Ship
    2 Day(s)
  • Point Tap Series, for Stainless Steel, EX-SUS-POT

    Point Tap Series, for Stainless Steel, EX-SUS-POT

    OSG

    Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

    Days to Ship
    3 Day(s) or more
  • Point Tap for Stainless Steel SU + PO / SU - PO

    Point Tap for Stainless Steel SU + PO / SU - PO

    YAMAWA MFG

    Work hardening suited for hole drilling of significantly gummy materials, from stainless steel and chrome steel to molybdenum steel.

    Days to Ship
    3 Day(s) or more
  • High-Speed Steel Point Tap
    • MiSUMi C-VALUE

    High-Speed Steel Point Tap【10 Pieces Per Package】

    MISUMI

    Limited special price is available for the standard sizes

    • Volume Discount
    Days to Ship
    2 Day(s)
  • Super Hard Taps for Super High Hardness Steel, UH-CT

    Super Hard Taps for Super High Hardness Steel, UH-CT

    YAMAWA MFG

    SKD Material "Pre-hardened" Best suited for Tapping of 55 to 60 HRC (MAX; 63HRC) Screw Processing Length is 1.5D, with a chamfer length of 5 pitches in order to give a greater lifespan. Female screws with a maximum internal diameter of 6H are recommended for pilot holes.

    Days to Ship
    3 Day(s)
  • Point Tap Series, General Long Shank, EX-LT-POT

    Point Tap Series, General Long Shank, EX-LT-POT

    OSG

    Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

    Days to Ship
    3 Day(s) or more
  • Long Shank Point Taps, LS - PO (LS - N - PO)

    Long Shank Point Taps, LS - PO (LS - N - PO)

    YAMAWA MFG

    * LS-N-PO will be replaced with LS-PO as soon as there is no more in stock.

    Days to Ship
    3 Day(s) or more
  • TiN Coated High-Speed Steel Point Tap
    • MiSUMi C-VALUE

    TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】

    MISUMI

    Limited special price is available for the standard sizes

    • Volume Discount
    Days to Ship
    2 Day(s)
  • Point Tap Series, for Stainless Steel, EX-SUS-POT

    Point Tap Series, for Stainless Steel, EX-SUS-POT

    OSG

    Great sharpness and durability when used in through holes of machinability bad stainless steel. It is also suitable in various kinds of heat-resistant steel and tough nickel chrome manganese steel, other stainless steels.

    Days to Ship
    3 Day(s) or more
  • Stainless Steel Machining Tap, Point Tap / Spiral Tap

    Stainless Steel Machining Tap, Point Tap / Spiral Tap

    MISUMI

    in order to allow the small diameter tapping of stainless steel that's most prone to breakage, it is given the special surface treatment.

    • Volume Discount
    Days to Ship
    4 Day(s)
  • Plus Series Point Tap, + PO (N + PO)

    Plus Series Point Tap, + PO (N + PO)

    YAMAWA MFG

    * N+SP will be replaced with +SP as soon as there is no more in stock.

    Days to Ship
    3 Day(s) or more
  • Point Tap Series, for Difficult-to-Machine Material, CPM-POT

    Point Tap Series, for Difficult-to-Machine Material, CPM-POT

    OSG

    Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

    Days to Ship
    3 Day(s) or more
  • A Tap Series Point Tap Long Shank A-LT-POT

    A Tap Series Point Tap Long Shank A-LT-POT

    OSG

    Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

    Days to Ship
    3 Day(s)
  • Point Tap Series, for Deep Holes, EX-DH-POT

    Point Tap Series, for Deep Holes, EX-DH-POT

    OSG

    Suitable for through holes with extra long threads and materials that easily suffer sticking.

    Days to Ship
    3 Day(s) or more
  • Cobalt Jet Tap

    Cobalt Jet Tap

    ISHIHASHI

    Having toughness associated with high-molybdenum, it performs high hardness, excellent heat and wear resistance.

    Days to Ship
    2 Day(s) or more
  • Point Tap Series, V Coated, V-POT

    Point Tap Series, V Coated, V-POT

    OSG

    Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

    Days to Ship
    3 Day(s) or more
  • Jet Tap for Stainless Steel

    Jet Tap for Stainless Steel

    ISHIHASHI

    Reduced Friction Torque From Special Shape Design and Unique Second Machining

    Days to Ship
    4 Day(s)
  • Point Tap Series, Tin Coated, TIN-POT

    Point Tap Series, Tin Coated, TIN-POT

    OSG

    Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

    Days to Ship
    3 Day(s) or more
  • Titanium Coating Point Taps, PO - V (N - PO - V)

    Titanium Coating Point Taps, PO - V (N - PO - V)

    YAMAWA MFG

    * N-PO-V will be replaced with PO-V as soon as there is no more in stock.

    Days to Ship
    3 Day(s) or more
  • Jet Taps for Deep Hole

    Jet Taps for Deep Hole

    ISHIHASHI

    Uses a short thread design groove made to increase debris removal, decrease friction, and improve lubricating oil delivery even when tapping to a depth of over twice the nominal diameter.

    Days to Ship
    4 Day(s)
  • Insert Screw Tap Series, Point Tap EX-HL-POT

    Insert Screw Tap Series, Point Tap EX-HL-POT

    OSG

    Used For Threading of Screws Used for in Through Holes Inserts (Helical Coil)

    Days to Ship
    3 Day(s)
  • Jet Taps

    Jet Taps【1-3 Pieces Per Package】

    ISHIHASHI

    Large diameter of the tap core improves torsion strength; almost zero breakage occurrence.

    Days to Ship
    3 Day(s) or more
  • Long Neck Jet Taps

    Long Neck Jet Taps

    ISHIHASHI

    Long Neck Type for Through Hole Machining

    Days to Ship
    3 Day(s)
  • Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

    Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

    OSG

    Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

    Days to Ship
    3 Day(s) or more
  • Oversize Point Taps

    Oversize Point Taps

    SKC

    Enables High Speed High Longevity Machining by Delivering Machining Oil and Providing Effective Debris Removal From the Lubrication Hole

    Days to Ship
    4 Day(s)
  • Oxidation Treatment Point Taps, PO-OX (N-PO-OX)

    Oxidation Treatment Point Taps, PO-OX (N-PO-OX)

    YAMAWA MFG

    * N-PO-OX will be replaced with PO-OX as soon as there is no more in stock.

    Days to Ship
    3 Day(s) or more
  • T Gun Tap TGN

    T Gun Tap TGN

    NACHI(FUJIKOSHI)

    General-use tap for threading of through holes.

    Days to Ship
    3 Day(s) or more
  • Point Tap Series, for Thin Plates, EX-SS-POT

    Point Tap Series, for Thin Plates, EX-SS-POT

    OSG

    Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes

    Days to Ship
    3 Day(s) or more
  • Point Tap Series, General Homo Treatment, EX-H-POT

    Point Tap Series, General Homo Treatment, EX-H-POT

    OSG

    Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

    Days to Ship
    3 Day(s) or more
  • Point Tap for Difficult-To-Cut Materials EH-PO

    Point Tap for Difficult-To-Cut Materials EH-PO

    YAMAWA MFG

    35 ~ 45 HRC hardness of high-carbon steels, alloy steel forgings and tempered materials, mold materials and other, is suitable for tapping of high hardness steel.

    Days to Ship
    3 Day(s) or more
  • Long Jet Taps

    Long Jet Taps

    ISHIHASHI

    Cutting torque is extremely light for shear cutting, due to spiral cutting edge and large angle.

    Days to Ship
    3 Day(s) or more
  • Point Tap Series, for Copper, CU-POT

    Point Tap Series, for Copper, CU-POT

    OSG

    Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper

    Days to Ship
    3 Day(s)
  • G Oil Hole Tap GOH-T

    G Oil Hole Tap GOH-T

    NACHI(FUJIKOSHI)

    Patented oil cap allows sharing of through holes and blind holes.

    Days to Ship
    5 Day(s)
  • Plus Series Point Tap Oxidation Treatment, +PO-OX (N+PO-OX)

    Plus Series Point Tap Oxidation Treatment, +PO-OX (N+PO-OX)

    YAMAWA MFG

    *N+PO-OX will be replaced with +PO-OX as soon as there is no more in stock.

    Days to Ship
    5 Day(s) or more
  • Short Point Tap for Deep Hole S-PO

    Short Point Tap for Deep Hole S-PO

    YAMAWA MFG

    Effective in deep hole tapping of more than 2.5 times the nominal diameter, with less frictional resistance due to short length of the threaded portion, and good cutting oil supplying.

    Days to Ship
    3 Day(s) or more
  • T Gun Tap for Stainless Steel TGNS

    T Gun Tap for Stainless Steel TGNS

    NACHI(FUJIKOSHI)

    Suited for through hole screw machining on stainless steel and heat resistant steel.

    Days to Ship
    5 Day(s)
  • Machine Nut Taps for Meter Coarse Screws (60° Angle)

    Machine Nut Taps for Meter Coarse Screws (60° Angle)

    SKC

    Meter (Left Screw, Right Screw)

    Days to Ship
    4 Day(s)
  • I-Series General Purpose Point Tap IPO

    I-Series General Purpose Point Tap IPO

    YAMAWA MFG

    Suitable for screw machining in simple mounting of thin iron plates such as SPC, SPH and mild steel below SS400, S20C.

    Days to Ship
    3 Day(s)
  • G Gun Tap GGN

    G Gun Tap GGN

    NACHI(FUJIKOSHI)

    Can do high speed / high efficiency threading of through holes in everything from standard steel to difficult to grind materials.

    Days to Ship
    3 Day(s) or more
  • Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

    Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

    OSG

    Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

    Days to Ship
    3 Day(s)

Configure

Clear All

Specification/Dimensions

  • Thread Types

  • Thread Size (Nominal)

    • No0UN
    • S0.1
    • S0.2
    • S0.3
    • S0.4
    • S0.5
    • S0.6
    • S0.7
    • S0.8
    • S0.9
    • 1"1/16U
    • 1"1/16UN
    • 1"1/2"UN
    • 1"1/2U
    • 1"1/2UN
    • 1"1/4"UN
    • 1"1/4U
    • 1"1/4UN
    • 1"1/8"UN
    • 1"1/8U
    • 1"1/8UN
    • 1"3/16U
    • 1"3/16UN
    • 1"3/4U
    • 1"3/4UN
    • 1"3/8"UN
    • 1"3/8U
    • 1"3/8UN
    • 1"5/16U
    • 1"5/16UN
    • 1"5/8U
    • 1"5/8UN
    • 1"7/8UN
    • 1' -11
    • 1' 1/2-11
    • 1' 1/4-11
    • 1'-11
    • 1'-11.5
    • 1'1/2-11
    • 1'1/4-11
    • 1'8UNC
    • 1'W8
    • 1-16-27
    • 1/16-27
    • 1/16-28
    • 1/2-13 UNC
    • 1/2-14
    • 1/2-20 UNF
    • 1/2UN
    • 1/2UNJ
    • 1/2W12
    • 1/4-18
    • 1/4-19
    • 1/4-20 UNC
    • 1/4-28 UNC
    • 1/4-28 UNF
    • 1/4UN
    • 1/4UNJ
    • 1/4W20
    • 1/8-18
    • 1/8-27
    • 1/8-28
    • 1/8N
    • 1/8SM44
    • 1/8UN
    • 1/8W40
    • 1UN
    • 1UNS
    • BC1
    • BSF1"1/2
    • BSF1"3/4
    • BSF1"3/8
    • BSF1"5/8
    • BSF1"7/8
    • G1
    • G1"1/2
    • G1"1/4
    • G1"1/8
    • G1"3/4
    • G1"3/8
    • G1/16
    • G1/2
    • G1/4
    • G1/8
    • G1PF
    • M1
    • M1~10
    • M1~6
    • NPS1
    • NPS1"1/2
    • NPS1"1/4
    • NPS1/16
    • NPS1/2
    • NPS1/4
    • NPS1/8
    • NPT1
    • NPT1"1/2
    • NPT1"1/4
    • NPT1/16
    • NPT1/2
    • NPT1/4
    • NPT1/4-18
    • NPT1/8
    • NPT1/8-27
    • No1UN
    • PF1
    • PF1'-11
    • PF1/2
    • PF1/4
    • PF1/4-19
    • PF1/8
    • PF1/8-28
    • PS1
    • PS1/2
    • PS1/2-14
    • PS1/4
    • PS1/4-19
    • PS1/8
    • PS1/8-28
    • PT1'-11
    • PT1/2-14
    • PT1/4-19
    • PT1/8-28
    • R1
    • R1"1/2
    • R1"1/4
    • R1"1/8
    • R1"3/4
    • R1"3/8
    • R1/16
    • R1/2
    • R1/4
    • R1/8
    • Rc1
    • Rc1/2
    • Rc1/4
    • Rc1/8
    • Rp1
    • Rp1"1/2
    • Rp1"1/4
    • Rp1"3/4
    • Rp1/16
    • Rp1/2
    • Rp1/4
    • Rp1/8
    • S1
    • SM1/2
    • SM1/4
    • SM1/8
    • W1
    • W1"1/16
    • W1"1/2
    • W1"1/4
    • W1"1/8
    • W1"3/16
    • W1"3/4
    • W1"3/8
    • W1"5/16
    • W1"5/8
    • W1"7/8
    • W1/16
    • W1/2
    • W1/4
    • W1/8
    • M1.1
    • M1.2
    • S1.2
    • BC1.37
    • M1.4
    • S1.4
    • M1.5
    • M1.6
    • M1.7
    • M1.8
    • 2"1/2UN
    • 2"1/4UN
    • 2"3/4UN
    • 2' -11
    • 2'-11
    • 2U
    • 2UN
    • BSF2
    • BSF2"1/4
    • G2
    • G2"1/2
    • M2
    • M2~10
    • M2~8
    • NPS2
    • NPS2"1/2
    • NPT2
    • NPT2"1/2
    • No.2-56UNC
    • No.2-64UNC
    • No2UN
    • R2
    • R2"1/2
    • Rp2
    • Rp2"1/2
    • W/2
    • W2
    • W2"1/2
    • W2"1/4
    • W2"1/8
    • W2"3/4
    • W2"3/8
    • W2"7/8
    • M2.2
    • M2.3
    • M2.5
    • M2.6
    • 3"1/2UN
    • 3/16UN
    • 3/16W24
    • 3/4-10 UNC
    • 3/4-14
    • 3/4-16 UNF
    • 3/4UN
    • 3/4W10
    • 3/8-16 UNC
    • 3/8-18
    • 3/8-19
    • 3/8-24 UNF
    • 3/8-UNJ
    • 3/8UN
    • 3/8UNJ
    • 3/8W16
    • 3U
    • 3UN
    • BC3/8
    • G3
    • G3"1/2
    • G3/4
    • G3/8
    • M3
    • M3 - M10
    • M3~10
    • M3~12
    • M3~6
    • M3~8
    • NO.3-48UNC
    • NPS3
    • NPS3"1/2
    • NPS3/4
    • NPS3/8
    • NPT3
    • NPT3"1/2
    • NPT3/4
    • NPT3/8
    • No.3-56UNF
    • No3UN
    • PF3/4
    • PF3/4-14
    • PF3/8
    • PF3/8-19
    • PS3/4
    • PS3/8
    • PS3/8-19
    • PT3/4-14
    • PT3/8-19
    • R3
    • R3"1/2
    • R3/4
    • R3/8
    • Rc3/4
    • Rc3/8
    • Rp3
    • Rp3"1/2
    • Rp3/4
    • Rp3/8
    • SM3/16
    • SM3/32
    • SM3/8
    • W3
    • W3/16
    • W3/32
    • W3/4
    • W3/8
    • M3.5
    • 4UN
    • G4
    • M4
    • M4~10
    • M4~13
    • M4~14
    • NO.4-48UNF
    • NPS4
    • NPT4
    • No.4-40UNC
    • No.4-40UNF
    • No4UN
    • R4
    • Rp4
    • W4"1/2
    • M4.5
    • 5/16-18 UNC
    • 5/16-24 UNF
    • 5/16UN
    • 5/16UNJ
    • 5/16W18
    • 5/32UN
    • 5/32W32
    • 5/8-11 UNC
    • 5/8-18 UNF
    • 5/8UN
    • 5/8W11
    • 5/W11
    • BC5/16
    • CTV5
    • G5/8
    • M5
    • M5 - M12
    • M5~10
    • M5~12
    • M5~13
    • NO.5-40UNC
    • NPS5/8
    • NPT5/8
    • No.5-44UNC
    • No5UN
    • R5/8
    • SM5/16
    • W5/16
    • W5/32
    • W5/8
    • M5.5
    • M6
    • M6 – 20
    • NO.6-32UNC
    • No.6-32UNF
    • No.6-40UNC
    • No6UN
    • No6UNJ
    • W6
    • M6.5
    • W6.8
    • 7/16-14 UNC
    • 7/16-20 UNF
    • 7/16UN
    • 7/16UNJ
    • 7/32UN
    • 7/8-14 UNF
    • 7/8-9 UNC
    • 7/8UN
    • 7/8W9
    • G7/8
    • NPS7/8
    • NPT7/8
    • R7/8
    • SM7/16
    • SM7/32
    • W"7/8
    • W7
    • W7/16
    • W7/32
    • W7/8
    • m7
    • M7.5
    • CTV8
    • M8
    • M8~12
    • NO.8-32UNC
    • No.8-32UNF
    • No.8-36UNF
    • No8UN
    • No8UNJ
    • W8
    • M8.5
    • 9/16-18 UNF
    • 9/16UN
    • 9/64SM40
    • 9UN
    • BC9/16
    • M9
    • SM9/32
    • SM9/64
    • W9/16
    • M9.5
    • W9.5
    • W9.8
    • CTV10
    • M10
    • M10~25
    • M10~30
    • No.10-24UNC
    • No.10-32UNC
    • No.10-32UNF
    • No10UN
    • No10UNJ
    • TM10
    • TW10
    • Tr10
    • W10
    • 11/64SM40
    • M11
    • SM11/32
    • SM11/64
    • W11
    • W11/16
    • M12
    • M]12
    • No.12-24UNC
    • No.12-28UNC
    • No12UN
    • TM12
    • TW12
    • W12
    • W12.5
    • M13
    • W13
    • W13.5
    • W13.8
    • M14
    • TM14
    • TW14
    • W14
    • M15
    • SM15/64
    • W15
    • W15/16
    • M16
    • TM16
    • TW16
    • Tr16
    • W16
    • M17
    • W17
    • M18
    • TM18
    • TW18
    • W18
    • M19
    • M19~32
    • M19~33
    • M19~38
    • M19~42
    • W19
    • M20
    • TM20
    • TW20
    • Tr20
    • W20
    • W20.32
    • M21
    • W21
    • M22
    • TM22
    • TW22
    • W22
    • M23
    • W23
    • M24
    • TM24
    • TW24
    • W24
    • M25
    • M25~50
    • M25~60
    • M25~70
    • M25~72
    • TM25
    • TW25
    • W25
    • M26
    • TM26
    • TW26
    • W26
    • M27
    • W27
    • M28
    • TM28
    • TW28
    • W28
    • M29
    • W29
    • M30
    • TM30
    • TW30
    • W30
    • M32
    • TM32
    • W32
    • M33
    • W33
    • M34
    • W34
    • M35
    • W35
    • M36
    • TM36
    • W36
    • M37
    • M38
    • W38
    • M39
    • W39
    • M40
    • TM40
    • W40
    • M42
    • M42~120
    • W42
    • M43
    • M44
    • W44
    • M45
    • W45
    • M46
    • M48
    • W48
    • M50
    • W50
    • M52
    • W52
    • M54
    • W54
    • M55
    • W55
    • M56
    • W56
    • M58
    • M60
    • W60
    • M62
    • W62
    • M64
    • M65
    • W65
    • M68
    • M70
    • W70
    • M72
    • M75
    • W75
    • M76
    • M78
    • M80
    • M82
    • M85
    • M90
    • M95
    • M100
    • M110
    • M115
    • M120
    • 06510X28R
    • 060163N050M
    • 060163N100M
    • 060163N125M
    • 065103X28G
    • 075203N150M
    • 080153X19G
    • 080153X19R
    • 090244N125M
    • 090244N175M
    • 100254N050M
    • 100254N100M
    • 100254N150M
    • 100254N200M
    • 120204X14G
    • 120204X14R
    • 120304N100M
    • 120304N150M
    • 120304N200M
    • 160264X11G
    • 160264X11R
    • 160404N150M
    • 160404N200M
    • 160404N250M
    • 200305X11G
    • 200305X11R
    • 200505N150M
    • 200505N200M
    • 200505N300M
  • Pitch (P), Thread Count(mm)

    • 0.025
    • 0.05
    • 0.08
    • 0.1
    • 0.125
    • 0.15
    • 0.175
    • 0.2
    • 0.225
    • 0.25
    • 0.3
    • 0.35
    • 0.4
    • 0.45
    • 0.5
    • 0.6
    • 0.7
    • 0.75
    • 0.8
    • 0.9
    • 1
    • 1.25
    • 1.5
    • 1.5-2
    • 1.75
    • .02
    • 2
    • 2.5
    • 2.52
    • 3
    • 3 1/2
    • 3.5
    • 4
    • 4 1/2
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 11 1/2
    • 11.5
    • 12
    • 13
    • 14
    • 16
    • 18
    • 19
    • 20
    • 24
    • 26
    • 27
    • 28
    • 30
    • 32
    • 36
    • 40
    • 44
    • 48
    • 56
    • 60
    • 64
    • 72
    • 80
  • Number of Chamfered Threads (Lcf)

    • 1 P
    • 1.5 P
    • 2 P
    • 2.5 P
    • 3 P
    • 3.5 P
    • 4 P
    • 4.5 P
    • 5 P
    • 6 P
    • 8 P
    • 9 P
    • 24 P
    • 25 P
    • 26 P
    • 27 P
    • 29 P
    • 30 P
  • Tool Material Type

  • Work Material

  • Tap Model

  • Bore Model

  • Coating Presence

  • Coating Type

  • Overall Length (L)(mm)

    • 30
    • 32
    • 34
    • 35
    • 36
    • 39
    • 40
    • 41.5
    • 42
    • 44
    • 45
    • 46
    • 48
    • 49
    • 50
    • 52
    • 54
    • 55
    • 57
    • 58
    • 59
    • 59.5
    • 60
    • 61
    • 61.5
    • 62
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 70/70/70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 78
    • 79
    • 80
    • 81
    • 82
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 95
    • 96
    • 97
    • 99
    • 100
    • 102
    • 105
    • 109
    • 110
    • 111
    • 112
    • 115
    • 119
    • 120
    • 121
    • 122
    • 123
    • 125
    • 127
    • 130
    • 133
    • 135
    • 140
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 155
    • 158
    • 159
    • 160
    • 165
    • 167
    • 170
    • 175
    • 180
    • 184
    • 185
    • 188
    • 190
    • 195
    • 200
    • 204
    • 205
    • 210
    • 215
    • 216
    • 220
    • 225
    • 230
    • 235
    • 240
    • 245
    • 250
    • 255
    • 260
    • 265
    • 270
    • 275
    • 280
    • 290
    • 300
    • 310
    • 315
    • 320
    • 330
    • 340
    • 350
    • 370
    • 390
    • 410
    • 420
    • 435
    • 440
    • 450
    • 460
    • 500
    • 505
    • 525
    • 540
    • 590
    • 780
    • 890
    • 900
    • 1000
    • 1050
    • 1210
    • 1250
    • 1270
    • 1480

Brands

Brand

MISUMI's own Brand-Name Product Business
  • C-Value
MISUMI Public Circulation Product Business

CAD Type

  • 2D
  • 3D

Select Image

Close