(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Dowel Pins, Spring Pins, Stepped Pins（Shaft Dia. Tolerance：Negative Tolerance）
Standards are stipulated in JIS, and products designed according to both the new and old JIS standards are available. MISUMI offers products of both standards, so note the difference in tolerance.
Besides the dowel pin, MISUMI offers abundant shapes such as spring pin and stepped pin, as well as sizes from 0.1 to 30 mm and length from 2 to 200 mm. [Materials] > Stainless steel, iron (steel), resin
[Nominal Diameter] > 0.1 to 30 mm
Configure
Specification/Dimensions
-
Nominal Dia.
-
Shaft Dia. Tolerance
- Positive Tolerance
- Negative Tolerance
-
Length
-
End Shape
-
Standard -
Tapped -
External Thread
-
-
Outer Dia. (Max.)(mm)
-
Material
-
Properties
-
Outer Dia. (Min.)(mm)
-
Surface Treatment
-
Sales Unit
|
Shape
|
|
|---|---|
Brand |
|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 31 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dowel, Negative Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: h7
MISUMI
[Features]A dowel with minus tolerance. [Shape]Straight / stepped parallel; Material: Available in SUS304 or SUS440C / 13Cr stainless steel.From: ฿ 23.66 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Parallel Pin Class B, h7 SUS303
OHKITA
An SUS303 dowel pin.
Use for applications that require corrosion-resistance.
The shape at both ends is the same.
[Features]
· Not just limited to positioning applications, but is also used widely as machinery parts.From: ฿ 12.96 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Parallel Pin B Type【1-1,000 Pieces Per Package】
HIMENO PRECISION
Dowel pin with h7 (minus tolerance). On the website, it is available up to M diameter 25 and length 150 mm.From: ฿ 2.70 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dowel, Negative Tolerance, End Shape: Chamfer Edge on Both Sides, Fit Tolerance: h7
MISUMI
[Features]A dowel with minus tolerance. [Shape]Straight / stepped parallel; Material: SUS304 and SUS440C.From: ฿ 61.03 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
![Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]](//th.misumi-ec.com/en/linked/material/mech/MSM1/PHOTO/10302390960.jpg?$product_view_b$)
Until 31/03/2025
Until 31/03/2025Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]
MISUMI
*This product is available as mechanical parts and parts for press molds.
This page is based on the content listed in the mechanical parts catalog.From: ฿ 21.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dual Fit Dowel Pins - p6-h7 p6-g6
MISUMI
[Features]A stepped parallel pin with different diameter tolerances on both ends. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.From: ฿ 108.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dowel, Negative Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: h7
MISUMI
[Features]A dowel with minus tolerance. [Shape]Straight / stepped parallel; Material: SUS440CFrom: ฿ 55.50 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6
MISUMI
[Features]A general-purpose pin with an outer diameter tolerance of g6. [Shape]Straight / stepped parallel; Material: SUJ2/SUS304/SUS440C.From: ฿ 61.03 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Parallel Pin, Class B, h7 SUS316
OHKITA
An SUS316 dowel pin.
Resistance to pitting and crevice corrosion is better than SUS303.
Excellent corrosion-resistance to media such as seawater and salt water.
The shape at both ends is the same.From: ฿ 29.72 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Super Shaft H7【1-30 Pieces Per Package】
KS SANGYO
Parallel pin of the former JIS h7 (negative tolerance).From: ฿ 486.85 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025OHKITA
Dowel pins developed for positioning molds, jigs, etc.
[Features]
· Made of chromium molybdenum steel, a material with a high shear strength. Performs reliably with thrust loads.
· The top surface has an especially smooth finish.
· Has a high surface hardness, minimizing the risk of galling.
· Has a tolerance range of 5 μm, with no sense of variation during use.From: ฿ 11.43 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dual Fit Dowel Pins - Hollow, Tapped
MISUMI
[Features]A stepped parallel pin with different diameter tolerances on both ends. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.From: ฿ 172.32 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6
MISUMI
[Features]A general-purpose pin with an outer diameter tolerance of g6. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.From: ฿ 64.62 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
S45C-Q Parallel Pin With Internal Thread h7【1-100 Pieces Per Package】
HIMENO PRECISION
[Feature]
· This is a dowel pin with an internal thread with minus tolerance (B class h7).
· Thermal refined.From: ฿ 40.40 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Long Super Shaft【1-10 Pieces Per Package】
KS SANGYO
A product standardized by KS industry based on JIS B1354 parallel pins.
[Features]
· Available in extra small sizes.
· Material: SUS 304.
· Hardness: HV 300 or higher.
· Diameter tolerance: h7.
· Diameter (d): 0.1 to 6.0 mm.
· Length: 50 to 150 mm.
[Applications]
· Can be used in a wide range of applications such as precision equipment, key components for industrial machinery, etc.From: ฿ 1,079.61 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025S45C-Q (Quenched) Parallel Pin B Type【1-10 Pieces Per Package】
HIMENO PRECISION
[Features]Hardening parallel pin with negative tolerance. [Shape]Straight/Parallel JogglingFrom: ฿ 6.20 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dowel Pin DP/h7【1-1,000 Pieces Per Package】
HIMENO PRECISION
[Features]Dowel Pin Series with negative tolerance. [Shape]Straight / Stepped Parallel; Material: SK4From: ฿ 10.35 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Stainless Steel Parallel Pin (Hard)【1-30,000 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are more accurate than those of the B type. Used for rotating shafts, hinges, etc.
After cutting, the product undergoes centerless grinding and finishing to ensure straightness, roundness, and outer diameter dimensions.
Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.From: ฿ 5.72 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Parallel Pin, Former JIS H7【1-1,000 Pieces Per Package】
HIMENO PRECISION
Pin with a negative tolerance that complies with the former JIS.From: ฿ 5.93 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
![[Clean & Pack] Dowel Pin - Undersized, End Shape: Both Ends C Chamfered, Mating Tolerance: h7](//content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310663569/110310663569_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack] Dowel Pin - Undersized, End Shape: Both Ends C Chamfered, Mating Tolerance: h7
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.From: ฿ 218.18 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Parallel Pin With Internal Thread h7 (Hardened)【1-500 Pieces Per Package】
SUNCO
[Shape] Straight
[Material] S45C
[Shaft diameter tolerance] Minus tolerance
[Shaft end shape] Internal thread
[Characteristics] General
[Surface treatment] None
[Hardening] Yes
[Nominal diameter] 5/6/8/10/12/13/16/20
[Length] 10 to 120From: ฿ 64.39 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
S45C-A Parallel Pin, B Type/Soft (h7)【100 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
* "h7" is the JIS fitting tolerance.From: ฿ 274.46 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Parallel Pin, Class B, h7【1-1,000 Pieces Per Package】
OHKITA
A negative tolerance type pin.
The shape at both ends is the same.
Materials: S45C equivalent (no heat treatment).
[Features]
· Not just limited to positioning applications, but is also used widely as machinery parts.From: ฿ 7.90 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025SUS303 Parallel Pin, B Type h7【1-1,000 Pieces Per Package】
SUNCO
Parallel pins, also called "knock pins".
[Features]
·When two or more parts are fastened together, they are drilled and hammered together while they are still in place.
·Used for precision machining and heavy-duty machines.
·Material: SUS303.
[Applications]
·Not limited to positioning applications, it is widely used as a machine part.From: ฿ 8.34 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Parallel Pin, Class B, h7 S45C-Q
OHKITA
A thermally refined type dowel pin.
The shape at both ends is the same.
Materials: S45C equivalent; Hardness: HRC 23 to 33.
[Features]
· Not just limited to positioning applications, but is also used widely as machinery parts.From: ฿ 16.68 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dowel Pin With Internal Thread THMDP
HIMENO PRECISION
[Features]Dowel pin with internal thread. [Shape]Straight / Stepped,Parallel; Material: SteelFrom: ฿ 29.83 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Parallel Pin, B-Type h7 (Hardened)【1-1,000 Pieces Per Package】
SUNCO
[Shape] Straight
[Material] S45C
[Shaft diameter tolerance] Minus tolerance
[Shaft end shape] Standard
[Characteristics] General
[Surface treatment] None
[Hardening] Yes
[Nominal diameter] 3/4/5/6/8/10/12/13/16/20
[Length] 6 to 100From: ฿ 13.34 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Stainless Steel Parallel Pin, B Type/Soft (h7)【100 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
* "h7" is the JIS fitting tolerance.From: ฿ 532.11 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Parallel Pin (B-Type, Made By Ohkita)【100-1,000 Pieces Per Package】
SUNCO
[Material] SUS316
[Shape] Both ends flat tipped
[Tolerance] h7From: ฿ 5,140.65 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dowel Pin With Inside Threads, C Type (With Spiral Grooved)
OHKITA
Dowel pin with internal thread with spiral air-vent groove.
[Features]
· Made of chromium molybdenum steel, a material with a high shear strength. Performs reliably with thrust loads.
· Smooth surface finish.
· Has a high surface hardness, minimizing the risk of galling.
· Has a tolerance range of 5 μm, with no sense of variation during use.
· A spiral shape is used for the air vent groove (except one part). No need to worry about the orientation during use.From: ฿ 45.18 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
S45C-Q Parallel Pin, B Type/Hard (h7)【100 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
* "h7" is the JIS fitting tolerance.From: ฿ 544.26 Days to Ship:
7 Day(s)
7 Day(s)
![Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]](http://th.misumi-ec.com/en/linked/material/mech/MSM1/PHOTO/10302390960.jpg?$product_view_b$)
![[Clean & Pack] Dowel Pin - Undersized, End Shape: Both Ends C Chamfered, Mating Tolerance: h7](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_view_b/t_misumi_wm/v1/p/jp/product/series/110310663569/110310663569_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| Nominal Dia. |
| Shaft Dia. Tolerance |
| Length |
| Shape |
| End Shape |
| Outer Dia. (Max.)(mm) |
| Material |
| Properties |
| Outer Dia. (Min.)(mm) |
| Surface Treatment |
| Sales Unit |
You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list. ![Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]](http://th.misumi-ec.com/en/linked/material/mech/MSM1/PHOTO/10302390960.jpg?$product_view_c$) Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list. ![[Clean & Pack] Dowel Pin - Undersized, End Shape: Both Ends C Chamfered, Mating Tolerance: h7](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_view_c/t_misumi_wm/v1/p/jp/product/series/110310663569/110310663569_001_20230911105917.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | MISUMI | OHKITA | HIMENO PRECISION | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OHKITA | KS SANGYO | OHKITA | MISUMI | MISUMI | HIMENO PRECISION | KS SANGYO | HIMENO PRECISION | HIMENO PRECISION | TAIYO STAINLESS SPRING | HIMENO PRECISION | MISUMI | SUNCO | TAIYO STAINLESS SPRING | OHKITA | SUNCO | OHKITA | HIMENO PRECISION | SUNCO | TAIYO STAINLESS SPRING | SUNCO | OHKITA | TAIYO STAINLESS SPRING |
| Product Series | Dowel, Negative Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: h7 | Dowel, Negative Tolerance, End Shape: Chamfer Edge on Both Sides, Fit Tolerance: h7 | Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog] | Dowel, Negative Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: h7 | General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6 | General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6 | S45C-Q Parallel Pin With Internal Thread h7【1-100 Pieces Per Package】 | S45C-Q (Quenched) Parallel Pin B Type【1-10 Pieces Per Package】 | Stainless Steel Parallel Pin (Hard)【1-30,000 Pieces Per Package】 | [Clean & Pack] Dowel Pin - Undersized, End Shape: Both Ends C Chamfered, Mating Tolerance: h7 | Parallel Pin With Internal Thread h7 (Hardened)【1-500 Pieces Per Package】 | S45C-A Parallel Pin, B Type/Soft (h7)【100 Pieces Per Package】 | Parallel Pin, B-Type h7 (Hardened)【1-1,000 Pieces Per Package】 | Stainless Steel Parallel Pin, B Type/Soft (h7)【100 Pieces Per Package】 | Parallel Pin (B-Type, Made By Ohkita)【100-1,000 Pieces Per Package】 | S45C-Q Parallel Pin, B Type/Hard (h7)【100 Pieces Per Package】 | |||||||||||||||
| CAD |
|
|
|
|
|
|
|
| |||||||||||||||||||||||
| From | ฿ 23.66 Special Price On Sale Until 31/03/2025 | ฿ 12.96 Special Price On Sale Until 31/03/2025 | ฿ 2.70 Special Price On Sale Until 31/03/2025 | ฿ 61.03 Special Price On Sale Until 31/03/2025 | ฿ 21.00 Special Price On Sale Until 31/03/2025 | ฿ 108.00 Special Price On Sale Until 31/03/2025 | ฿ 55.50 Special Price On Sale Until 31/03/2025 | ฿ 61.03 Special Price On Sale Until 31/03/2025 | ฿ 29.72 | ฿ 486.85 Special Price On Sale Until 31/03/2025 | ฿ 11.43 Special Price On Sale Until 31/03/2025 | ฿ 172.32 Special Price On Sale Until 31/03/2025 | ฿ 64.62 Special Price On Sale Until 31/03/2025 | ฿ 40.40 | ฿ 1,079.61 Special Price On Sale Until 31/03/2025 | ฿ 6.20 Special Price On Sale Until 31/03/2025 | ฿ 10.35 Special Price On Sale Until 31/03/2025 | ฿ 5.72 Special Price On Sale Until 31/03/2025 | ฿ 5.93 Special Price On Sale Until 31/03/2025 | ฿ 218.18 | ฿ 64.39 | ฿ 274.46 | ฿ 7.90 Special Price On Sale Until 31/03/2025 | ฿ 8.34 Special Price On Sale Until 31/03/2025 | ฿ 16.68 | ฿ 29.83 | ฿ 13.34 | ฿ 532.11 Special Price On Sale Until 31/03/2025 | ฿ 5,140.65 | ฿ 45.18 | ฿ 544.26 |
| Days to Ship | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 4 Day(s) | Same day | Same day | Same day | Same day | Same day | 7 Day(s) | 5 Day(s) | 7 Day(s) | Same day | Same day | 5 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 6 Day(s) | 5 Day(s) | 7 Day(s) |
| Nominal Dia. | 1 ～ 10 | 1 ～ 20 | 1 ～ 25 | 2 ～ 8 | 5 ～ 16 | 3 ～ 12 | 5 ～ 12 | 2 ～ 8 | 2 ～ 6 | 0.1 ～ 6 | 3 ～ 13 | 6 ～ 12 | 5 ～ 12 | 6 ～ 20 | 4 ～ 6 | 3 ～ 25 | 2 ～ 20 | 1 ～ 3 | 2 ～ 25 | 3 ～ 6 | 5 ～ 20 | 4 ～ 6 | 1 ～ 30 | 1 ～ 12 | 3 ～ 30 | 5 ～ 20 | 3 ～ 20 | 4 ～ 6 | 2 ～ 6 | 6 ～ 20 | 5 ～ 6 |
| Shaft Dia. Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance |
| Length | 5 ～ 60 | 4 ～ 100 | 4 ～ 150 | 6 ～ 20 | 10 ～ 150 | 8 ～ 40 | 10 ～ 50 | 6 ～ 20 | 4 ～ 30 | 2 ～ 65 | 10 ～ 100 | 12 ～ 40 | 10 ～ 45 | 10 ～ 120 | 80 ～ 150 | 6 ～ 150 | 4 ～ 100 | 3 ～ 35 | 8 ～ 80 | 6 ～ 20 | 10 ～ 120 | 8 ～ 22 | 4 ～ 200 | 4 ～ 100 | 6 ～ 150 | 10 ～ 80 | 6 ～ 100 | 8 ～ 28 | 5 ～ 30 | 20 ～ 100 | 12 ～ 16 |
| Shape | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | - | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | - | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel |
| End Shape | Standard | Standard | Standard | Standard | Tapped | Standard | Tapped | Standard | Standard | Standard | Standard | Tapped | Tapped | Tapped | Standard | Standard | Standard | Standard | Standard | Standard | Tapped | Standard | Standard | Standard | Standard | Tapped | Standard | Standard | Standard | Tapped | Standard |
| Outer Dia. (Max.)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 ～ 6 | - | - |
| Material | Stainless Steel | Stainless Steel | Stainless Steel ～ Steel | Stainless Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Stainless Steel | Stainless Steel ～ Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Steel | Stainless Steel | Steel | Steel | Stainless Steel | Steel | - | Steel | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel |
| Properties | - | Regular | - | - | - | - | - | - | Regular | - | Regular | - | - | - | - | - | - | Regular | - | - | Regular | Regular | Regular | Regular | Regular | - | Regular | Regular | Regular | Regular | Regular |
| Outer Dia. (Min.)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.99 ～ 5.988 | - | - |
| Surface Treatment | - | Not Provided | Not Provided | - | - | - | - | - | Not Provided | - | Not Provided | - | - | Not Provided | - | Not Provided | Not Provided | Not Provided / Glossy Finishing | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. |
Loading...
Related Categories to Dowel Pins, Spring Pins, Stepped Pins
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?